Logo
FULL SITE MENU

Recent content by bcclew

  1. B

    gimble bearing

    thanks
  2. B

    gimble bearing

    2006 5.0 brov 3 gimble bearing what is the best brand?with all these china wons around thanks
  3. B

    rudder packing

    1976 silverton 28FT ; ANYONE KNOW THE PACKING SIZE FOR RUDDER SHAFTS ? THANKS
  4. B

    deck core filler

    i have worked with balsa filler for deck repair .i am wondering if anyone has worked with Plascore Board just wondering it seems it will never soak up water if you get leak thanks for any help bcclew
  5. B

    deck engine covers

    1976 silverton 26 ft getting soft spots in cover.i have fixed soft spots in the deck.there filled with balsa wood . wondering has anybody done covers ? are they balsa wood also?thanks
  6. B

    No start

    Ok here is what I figured out. 2001 sea ray 31ft 5.7 efi. Starboard motor started fine . Turning on n ignition you can feel fuel pump relay click .and beep as soon as ignition is turned on not on port motor.switched relay. Now beep and quick start. Without that circuit working and boat not...
  7. B

    No start

    Sorry about that what I meant was on normal start turning on ignition you will get a beep.i was always told that clears computer saying all circuits are good hit crank it will start.my question is if you don't that beep it will not start.true or false? Thanks
  8. B

    No start

    2001 31ft sea ray 5.7 starbor engine 1beep before start engine runs port engine no beep no start after crank then beep still no start thanks for any help
  9. B

    Dip stick

    Any one got a Borg Warner velvet v drive .could any tell me what the length of the dip stick .this is the one with only one dip stick . Trans fluid supplies both trans and v drive there not separate.they list plenty on line .one say's there all the same. I don't think so.some how mine got lost...
  10. B

    Borg Warner velvet drive

    Got new vent hole is clear all through this just rebuilt took for ride. Shut off to ck fluid unscrewing dip stick seem to be a lot pressure shot out an ounce or too of oil what do you think? Thanks
  11. B

    Wiring diagram

    1976 Silverton 26 ft flybridge anybody got a link for wireing dia anything from the 70s would be good thanks for any help
  12. B

    Rudder packing

    1976 Silverton might be dumb question can you repack a rudder with boat in water??? Thanks for any come backs bcclew
  13. B

    borg warner velvet dr

    ok guys problem solved there was a sealed package with the cover gaskets in it 5 or so in the big gasket box for cover was a lose cover gasket 75 thousands thick should have looked better. still nobody on youtube shown thick gasket or parts places not even alto but it was in there kit. thanks...
  14. B

    borg warner velvet dr

    this is the one piece drive and trans the out put shaft for the doubled race and 2 bearings . i only remember a paper gasket .been on line looked at many just shows paper gasket.with the cover bolted on i have about a 9 thousand gap between cover and gasket.took cover back off put old race back...
  15. B

    pencil zinks for heat exchanger

    do we use Teflon tape on pencil zincs?
See more
Back
Top