MarineEngine.com does not offer troubleshooting assistance or repair advice by email or by telephone.
You are invited to join our public Boat Repair Forum to seek assistance from other members.
You may also visit the Boat Motor Manuals section of our site to obtain a service manual.
Great, Thanks Racer. Do you think he has a workable block? I'm skeptical.
Hi thanks for trying to help but my head only has 10
1/2. Or 13mm bolts.
That's the right head, but I didn't mark it, sorry it's marked wrong.
Really your motor has 1/2 head bolts ????------Or are you referring to the size of the wrench used to remove them ??-----So the fact is your motor has 5/16-NC bolts for the cylinder head.----And the tork is 240 inch-lbs.------And I think I will step aside on this project now.
Sorry yes you are correct I am referring to the wrench to remove them. Not the actual size of the threaded bolt.
A 5/16-NC bolt is torqued to 240 INCH-LBS.------What do you get when you convert 20 FT-LBS to INCH-LBS ????------The water jacket cover has 1/4-NC screws to be torqued to 80 INCH-LBS.