Logo
FULL SITE MENU

TAMD41 Fuel Flow

C

cbinnington

New member
I am looking to install a fuel

I am looking to install a fuel flow meter on my twin TAMD41A's does anyone know the flow rates of the lift pumps?
 
Almost 2 times consumption at

Almost 2 times consumption at full speed.
Note that you will need 2 'meters' as return has to be deducted from the feed pump flow.
 
"The max consumption on that e

"The max consumption on that engine might be closer to 10-12 Gal/hr. Flow on the feed side might be around 15-20.
As I said you will need a dual meter system to correct for the return, unless you route the return through a cooler and vapor chamber and re-enter it into the circuit after the flow meter.
Check out this site. You will need one 0-80 L/hr.
http://www.floscan.com.au/Content_Common/pg-Series65000.seo"
 
Back
Top