Uflex USA Catalog

ACCESSORIES - FITTINGS Fitting for the back of the UP series helms “ORB, Size #6 to 3/8 COMP FITTING” Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A Compensating line brass plug of the UP series helms “1/4 NPT PLUG“ Helm Side = 1/4 NPT Fitting for the compensating line in the UP series helms or autopilot return line. Also for use with UC130-SVS “1/4 NPT to 3/8 COMP FITTING “ Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A Fitting for port / starboard line in the UP series helms prior to the boss fittings “1/4 NPT to 3/8 COMP FITTING “ Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A Fitting for the back of the UP series helms “ORB, Size #6 to 3/8 COMP FITTING” Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A Fitting for back of helm in a dual station installation “ORB, Size #6 to 3/8 COMP FITTING” Cylinder/Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A Fitting used in the back of the previous version of the UP series helms before the boss fitting “1/4 NPT to 3/8 COMP FITTING” Helm/Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A Bleed fitting for all outboard cylinders “ORB, Size #6 to 3/8 COMP FITTING” Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9\16 - 24 UNEF 2A Used to replace the boss fitting in new outboard cylinders when trying to connect ‘O’ ring face seal hoses “ORB, Size #6 to 3/8 COMP FITTING” Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9\16 - 24 UNEF 2A Bleed fitting for all inboard and stern drive cylinders “1/4 NPT to 3/8 COMP FITTING” Cylinder Side = 1/4 NPTHose Side = 9/16 -24 UNEF 2A T-Fitting for 3 standard 3/8” compression thread hose fittings “3/8 COMP FITTING” ALL Sides = 9/16 - 24 UNEF 2A 3/8” Compression Nut with ferrule for cut to lenth nylon tubing “3/8 COMP NUT” Side = 9/16 - 24 UNEF 2B Hose Side = 3/8 Compression Ferrule Used to connect 2 standars 3/8” Compression hoses “3/8 COMP FITTING” Both Sides = 9/16 - 24 UNEF 2A 90° fitting from bulkhead fitting to 3/8” compression hose “3/8 COMP FITTING” Fitting side = 9/16 - 24 UNEF 2B Hose Side = 9/16 - 24 UNEF 2A Fitting for the back of the Merc UP series helms to ‘O’ ring face seal Hoses 1/4 NPT to ORFS Fitting Side = 1/4 NPT Hose Side = ORFS (‘O’ ring Face) 90° fitting for the pressure and tank line on a poertech helm 90° fitting for the two high pressure outlets on a powertech helm/ also used for connecion from a bulkhead - T-Fitting used on bulkhead fittings or helm high pressure lines on powertech helm - 3-wat ORF fitting for Mercury style ORF hoses - 11/16” union to extend a KITPS/KITPSDS hose - ORF to ORF union for connection of high pressure ORF styel hoses - Used when connecting an Autopilot to Powertech System - Autopilot to ORF Hose - Typical Application Thread 89 - Fitting for UC130-SVS cylinder -