Uflex USA Catalog

TIE BARS FORTWINOUTBOARD ENGINES A94 x 26 • Suitable for applications with single UC128-OBF or UC130-SVS front mount cylinder NOTE: In the applications with dual cylinder use A90 tie bar for UC128-OBF and A95 tie bar for UC130-SVS • Allows to tilt the engines independently • Stainless steel components • Electropolished stainless steel ball joints • Not recommended for applications exceeding 500 HP • 5 different lengths available: A94 x 26 – 42448 K - 26” (660,4 mm) twin engine centers A94 x 28 – 42449 M - 28” (711,2 mm) twin engine centers A94 x 30 – 42450 W - 30” (762,0 mm) twin engine centers A94 x 32 – 42451 Y - 32” (812,8 mm) twin engine centers A94 x 34 – 42452 A - 34” (863,6 mm) twin engine centers A94 – 41204 Z - adjustable from 26” to 37.4” (660 mm to 950 mm) engine centers ATTENTION: As the tiller arm position varies from engine to engine and the distance between two engines is not predictable, unexpected interferences may occur while tilting. A duly check of the tie bar installation is then strongly recommended. Should you need additional information, please do not hesitate to refer to our Technical Service. A94 TIE BAR FOR TWIN OUTBOARD ENGINE/SINGLE UC128-OBF OR UC130-SVS CYLINDERS A94 TIE BAR APPLICATIONS Mercury ® 135-150-175 Optimax 2 Stroke 200-225 Optimax 2 Stroke 250 PRO XS 135-150-175 Verado 4 Stroke 200 Verado 4 Stroke 115-135-150 OHC BF 200 SOHC BF 225 A6 F115-150-200-225-250 4 Stroke E115-130-150-175-200 V6 E200-225-250-300 DF70-80-90 4 Stroke DF100-115-140-150-175 4 Stroke DF200-250-300 DOHC 4 Stroke Honda ® Yamaha ® Evinrude ® Suzuki ® ENGINE POWER WARNING These recommendations should be used as a general reference only. For any further information please contact our Technical Service. UC128 + A94 A94 application example A94 - 41204 Z 81