Uflex USA Catalog

HATCH LIFTERS Fig. 1 Fig. 2 Fig. 3 Fig. 4 AV AND ULYSSES SERIES ELECTRICAL HATCH LIFTERS AV Actuator Relay Box (optional) Battery (not supplied) Switch (optional) AV Actuator Relay Box (optional) Battery (not supplied) Switch (optional) 192 c/a b/d 0.0 0.1 0.2 0.3 0.4 0.5 0.15 0.2 0.3 0.4 0.5 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 1.09 1.14 1.17 1.24 1.30 1.34 1.41 1.34 1.26 1.21 1.17 1.15 1.13 1.11 1.10 1.09 1 .00 1.01 1.04 1.09 1.13 1 .16 1.23 1.16 1.10 1.06 1.04 1.02 1.01 1.00 1.00 1.00 1 .00 1.00 1.00 1.03 1.06 1 .10 1.16 1.10 1.04 1.01 1 .00 1.00 1.00 1.00 1.00 1. 00 1 .00 1.00 1.00 1.00 1.03 1 .06 1.12 1.06 1.26 1.01 1 .00 1.00 1.00 1.00 1.00 1. 00 1 .00 1.00 1.00 1.00 1.00 1. 03 1.10 1.03 1 .00 1.00 1.00 1.00 1.00 1. 00 1.00 1.00 1 .00 1.00 1.00 1.00 1.00 1 .01 1.08 1.01 1 .00 1.00 1.00 1.00 1.00 1. 00 1.00 1.00 0.1 COMPONENTS DESCRIPTION AV Series Hatch Lifter • nº 1 AV actuator for single installation (Fig.1) • nº 2 AV actuators for dual installation (Fig.2) • External diameter: 48 mm (1.9” ) • Length at closed position: 377 mm (14.8”) + stroke • Maximum oscillation range: 125° ULYSSES Series actuators • nº 1 Ulysses actuator (Fig.1) • no dual installatio • External diameter: 34 mm (1.3”) • Length at closed position: 308 mm (12.1”) + corsa • Maximum oscillation range: 180° Power supply cable: • AV and ULYSSES actuators are supplied with 5 ft (1,5 m) of electrical cable • Warning: in case of longer cable length required, do not substitute the existing harness, but make a junction following the instructions supplied with the product. Relay Box: 12-24V (on demand) Two way push-button with central off position (optional) Fuse (not supplied) Battery (not supplied) INSTALLATION • The following equation will help you to calculate the maximum strength (Fmax) required from the hatch lifter to open your hatch, knowing the dimensions and weight of the hatch and the position of the mounting brackets. Fmax = P x L x X x K * 2 b a Maximum load (Fmax): • AV Series actuators: 1200 N (120 kg - 265 lbs) single installation, pushing only 2400 N (240 kg - 530 lbs) dual installation pushing only Note: when the load exceeds 2400 N (240 kg - 530 lbs), it is possible to install more then two AV actuators. Please, contact our Technical Service for the proper electrical configuration • ULYSSES actuators: 650 N (65 kg - 144 lbs) single installation only, both pull and push *Values of Kwith ratio included between approx. 0 and 0.5 (if ratio > 0.5 use K=1)