Uflex USA Catalog

ACCESSORIES FOR CONTROLBOXES K62 – 40147 J Kit to connect C36, MACH36 and Mercury ® Gen II™ cables to B301, B302 and B501 Series control boxes. K63 - 40757 N Kit to connect C5, C16, MACH5 cables to B322 and B324 controls. K64 - 40758 R Kit to connect C22 cable to B322 and B324 controls. K65 - 40759 T Kit to connect C36 and MACH36 cables to B322 and B324 controls. K67 - 40705 T Kit to connect C2, C8 and MACHZero cables to B322 and B324 controls (supplied with the box) X12 - 34543 Q Neutral safety switch to prevent in-gear starting. X41 - 38130 F Neutral safety switch to prevent in-gear starting, suitable for B400 and B401-ETC controls. X43 - 38160 L Neutral safety switch to prevent in-gear starting, suitable for B103 and B104 controls. ACCESSORIES FOR CONTROL BOXES K63 SHOWN PARTS X 2 K65 SHOWN PARTS X 2 K64 SHOWN PARTS X 2 K67 SHOWN PARTS X 2 X12 X41 X43 K62 MECHANICAL SHIFT 1 mmechanical cable Voltage controlled engine Throttle Converter Electrical cable The Throttle Converter allows to steer a tension controlled engine with a mechanical control box. The system converts the mechanical input from a control cable into an electrical output to the engine. Suitable either for new installations and refitting, it allows to use an existing mechanical control and connect it to the electrical input of the new engine’s throttle. Throttle Converters can be easily packed together for multiple engines. • Equipped with 1 m (3.28 ft) mechanical cable with C2, C8 universal end fitting • 76 mm (3”) minimum stroke, 80 mm (3.15”) maximum stroke. • 30 cm (1 ft) electrical wire length Throttle Converter is suitable for most of the voltage controlled engines. For further information, please contact our Technical Assistance Service Mechanical side IP65 Sensor IP67 THROTTLE CONVERTER Packed together Throttle Converters for dual engine installations 170