Uflex USA Catalog

Control Unit V-Throttle I-Throttle SAEJ-Throttle PWM-Throttle SYSTEM CONTROL UNITS PA2-CU - 42017 F PA2-CU 4 engines Control Unit - 43157 D Control Unit: user interface for the configuration, settings and diagnostic of all the modules in a system. IP protection: IP65 Dim.: 8.5” x 4.7” (215 x 120 mm) PA2-VT - 42018 H - for 0-5V interfaces (voltage) PA2-IT - 42019 K - for 4-20 mA interfaces (current) They supply the throttle electronic signal. Required for use with direct connection to electronic throttle on the engine. IP protection: IP65 Dim.: 8” x 4.3” (205 x 110 mm) PA2-SAEJT - Customized It supplies the digital signals to CAN SAEJ 1939 or NMEA 2000 interfaces IP protection: IP65 Dim.: 8” x 4.7” (205 x 110 mm) PA2-PWMT - 42020 U It supplies the electrical signals to PWM interfaces IP protection: IP65 Dim.: 8” x 4.3” (205 x 110 mm) Shift Unit Power Unit M-Actuator PA2-SU - 42023 A It controls up to 2 shifts with solenoids. Required for use with direct connection to the electrical shift unit on the transmission. IP protection: IP65 Dim.: 8.3” x 4.7” (210 x 120 mm) PA2-PU - 42026 G Provides power for up to 4 modules with the input combination of up to 2 batteries, 12 and 24V. Required for all PowerA Mark II installations. IP protection: IP65 Dim.: 8” x 4.3” (205 x 110 mm) PA2-MA - 42027 J The electromechanical actuators can control any mechanical interface (throttle or shift) through MACHZero and C8 mechanical cables. IP protection: IP66 Length: 12.6” (320 mm) - ELECTRONIC CONTROL SYSTEM 12