SeaStar Solutions Catalog

142 ® SEASTAR / BAYSTAR HOSE AND TUBING: BAYSTAR TUBING ( HT4420H/H T4430H) Can be used with all BayStar helms with appropriate fittings. Kit contains two cut lengths of tubing. BayStar Tubing Kits: 20’ Kit (2 x 20’ lengths tubing): HT4420H 30’ Kit (2 x 30’ lengths tubing): HT4430H (NOTE: BayStar Cylinders with H suffix must use tubing part number with H suffix.) * Decrease effort by installing SeaStar HO51xx Outboard hose SEASTAR OUTBOARD HOSE KIT (HO51 XX *) Includes two hoses - can be used with all SeaStar systems, except SeaStar PRO, Capilano and 3-line inboard systems. SEASTAR PRO OUTBOARD KEVLAR HOSE KIT (HO57 XX *) Includes two hoses - can be used with all SeaStar / BayStar Steering Systems. OUTBOARD HOSE KIT HO51xx OUTBOARD HOSE KIT HO57xx BAYSTAR TUBING KIT HT44xxH STEERING - Hose and Tubing * SeaStar and SeaStar Pro Hose Kits are available in 2', 3',4',5' and in 2' increments from 6'-30'. 40 foot hose kits are special order only. SeaStar Steering hoses are a custom multi-layered composite design, engineered specifically for our systems. They are designed to exceed SAE and ABYC specifications and provide precise steering control not achievable with hydraulic industry standard hoses. SeaStar Hoses are engineered to provide the system with very low thermal expansion properties and are kink and abrasion resistant. Our hoses also feature a swaged solid fitting connection with an O-ring seal and a metal to metal backup to the primary seal. Due to performance and safety concerns, SeaStar Solutions recommends that ONLY SeaStar or SeaStar PRO steering hoses be used in SeaStar Steering Systems. NYLON TUBING (HT5xxx) Can be used with SeaStar 1.7 helms on stern drives (except with HC5332 cylinder) and small inboards with fitting kit; do not use on outboard systems. Part # Length x OD HT5092 25’ x 3/8” HT5095 50’ x 3/8” HT5097 75’ x 38” HT5100 100’ x 3/8”