SeaStar Solutions Catalog

132 ® • Large thread-on nut secures cable to helm. • Conical plastic nut holds spent travel tube. • Diecast bezel which can be either round one-piece or oval 2-piece design. • Older systems may have 2 helms (twin station). Kit: None. Big-T is sold as components. BIG-T ® SH5000P SB27265P Big-T This is an overview of SeaStar Solutions RACK & PINION steering helms likely to be encountered. • Four bolts and nuts secure cable’s rack housing to helm. • Helm/cable install as unit from back of dash. • Helm requires current generation rack cables (will not bolt up to older style cables). • Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications (NFB recommended for non-power assist outboards). • One bezel is offered; angle to dash is changed by adding wedges. See below: Kit: SS141XX (Rack Single Cable); HPS Rack is sold as components only. THE RACK™ & HPS RACK™ (“BACK MOUNT” RACK) • Four bolts and nuts secure cable’s rack housing to helm. • Helm has No FeedBack™ feature. • Helm/cable install as unit from back of dash. • Helm requires current generation rack cables (will not bolt up to older style cables). • Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications. • One bezel is offered; angle to dash is changed by adding wedges. See below: Kits: SS151XX (NFB Rack Single Cable), SS152XX (NFB Pro Rack Dual Cable). NFB™ RACK & NFB™ PRO RACK™ (“BACK MOUNT” RACK) RACK WEDGE KITS SB39526P (90° Bezel) The Rack HPS Rack SB39544P (90° Bezel) NFB Rack NFB Pro Rack SB27448P (10° Wedge Kit) The Rack, HPS Rack, NFB Rack & NFB Pro Rack SB27449P (20° Wedge Kit) The Rack, HPS Rack, NFB Rack & NFB Pro Rack SH5230P STEERING - Helms SH5210P HELM VISUAL IDENTIFICATION GUIDE: This is an overview of SeaStar Solutions ROTARY steering helms likely to be encountered. Note: Rack steering requires 2 1/4" hole.