Mercury Quicksilver Parts Guide

QUICKSILVER PLUS SERIES ENGINES The PLUS ‑ SERIES ENGINES from QUICKSILVER are 100% new construction, and contain all the parts a CRATE ENGINE lacks. These are drop ‑ in ‑ ready new marine engines. Based on popular MerCruiser and Mercury Remanufacturing models, these are 100% new engines that are built with marine ‑ grade engine internals and other NEW marine components. QUICKSILVER PLUES ‑ SERIES engines are 100% new factory engines for repowering classic boats built before 2008 in California, and prior 2010 for the other 49 ‑ states. Because these are completely new engines and not a major repair assembly, the old engine being replaced is to be returned per EPA 1068.240. Since the focus of PLUS ‑ SERIES ENGINES is repower, many parts included in new MerCruiser engines used for new boat construction are not included. Parts such as: transoms, trim pumps, Y ‑ Pipes, rigging, props, boat harnesses, riser kits, closed cooling kits, steering cylinders, lubes, and many other parts required for a successful repower must all be purchased separately. 8M0116645 3.0L TKS Alpha Sterndrive Engine Only. 135 HP @ 4800 RPM. 183 Cubic Inch Fully Dressed Marine Engine. Engine Features: Non ‑ Power Steering. Front Engine Mount. Turn Key Start Carburetor with Mechanical Fuel Pump. It is built with 100% new: cast iron cylinder heads and block, 9.3:1 pistons, and 1.5:1 rocker arms. Audio warning horn for overheat, low oil pressure, and low drive lube levels. It uses EST Analog Ignition, Single ‑ Point Water Drain Using Blue Hoses, and 14 ‑ Pin Harness. 3 ‑ Years of Limited Factory Warranty. Runs on 87 Octane Fuel. 135 HP 100% New Quicksilver Sterndrive Engine Replaces 3.0L Alpha sterndrive engines QUICKSILVER PLUS SERIES ENGINES Quicksilver Product Guide 331 QUICKSILVER® REPOWER

RkJQdWJsaXNoZXIy NTU1MzIx