Jabsco Pump Catalog

Drill Pumps Jabsco Drill Pumps provide a very versatile means of transferring fluid almost anywhere an electric drill with 1/4" to 3/8" (6mm to 10mm) chuck can be operated. They provide easy, powered pumping almost anywhere a hand utility pump might be used. • Pumps up to 3.5 GPM (13 LPM). • Self-priming to 3' (1m). • 1/4" (6mm) diameter shaft. • Supplied with 3/4" (19mm) garden hose thread port adapters. • Model 17215-0000 includes accessories for oil changing. FITTING Connections for 1/2" (13mm) ID hose and 3/4" GHT female threaded fittings SIZE 3-5/16" long x 3-1/2" wide x 2-3/16" high (84mm x 89mm x 56mm) WEIGHT 0.5lb (0.2kg) MODEL DESCRIPTION 17250-0003 Pump (boxed) with two GHT port adapters 17215-0000 Pump (poly bagged with header card) with two GHT port adapters, 1/4" x 40" (6mm x 102cm) probe and 1/2" x 36" (13mm x 91cm) hose for changing oil through a dipstick tube. Carton: 12 boxed or bagged units. 17255-0003-P Replacement Nitrile Impeller and Shaft WARNING Explosion hazard. Pumps with AC motors can spark. Explosion and death can occur. Do not use where flammable vapors are present. Always use a RCD circuit breaker when using electrical equipment near water. Always ensure that equipment is properly grounded. 17250-0003 High Speed Inflator/Deflator The Rule High Speed Inflator/Deflator inflates a typical 4-man dinghy in as little as one to two minutes. Adjustable nozzles have been included for most inflatables and valve types. Inflator kit available for replacement adapters. • 12 volt, 25 amp, maximum 2.6 psi, 20 CFM. • 10' (3m) cable length with battery clips. • Pre-lubricated and sealed bearings to ensure long life. • Robust fan drive belt for long life. • Adjustable nozzles for most inflatables and valve types included. • Grip pad for one-handed operation. • For replacement adapters, Model iD20K Inflator MODEL DESCRIPTION iD20 Inflator/Deflator with Adapters iD20K Replacement Adapter Kit The Rule General Purpose Pump is designed for use as a washdown pump and/or to circulate water to your livewell tanks. Heavy-duty construction for commercial or pleasure boat use. 1-1⁄2" (38mm) inlet and 1-1⁄2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self-priming. It pumps lots of water, but at low pressure. 12 volt DC unless noted. MODEL DESCRIPTION 17A Non-automatic, 3800 GPH (14380 LPH) 18A Non-automatic, 3700 GPH (14002 LPH), 24V DC 19A Non-automatic, 3700 GPH (14002 LPH), 32V DC General Purpose Centrifugal Pumps 74 08 General Purpose Pumps DRILL PUMPS & GENERAL PUMPS