Jabsco Pump Catalog

The Oil Change Pump is the same high-quality pump used in the Jabsco Multi-Engine Oil Change System. The powerful pump can change oil in a typical V-8 engine in just minutes. • Pump is reversible to both drain and refill engine oil. • Self-priming to 3' (1m) of lift. • Includes 3/8" NPT full flow ball valve. • Reversing switch guard to avoid accidental activation. • Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protected). FITTING Connections for 3/8" NPT male threaded fitting SIZE 7-7/8" long x 3-3/4" wide x 4-7/16" high (20cm x 10cm x 11cm) WEIGHT 9lb (4.1kg) MODEL DESCRIPTION 17830-0012 Oil Change Pump, 12V DC, fuse 15 amp 17830-0024 Oil Change Pump, 24V DC, fuse 8 amp 9200-0023-P Nitrile Impeller For service and spare parts listing, see page 226. Oil Change Pump The Do-It-Yourself Oil Changer is simple to use, and offers quick and easy oil changes for the leisure boat owner. • Fully assembled. • 14 quart (13L) container. • Tested for 1400 cycles. • 8' (2.49m) dipstick hose. SIZE 15" high x 14" diameter (35cm x 34cm) WEIGHT 6lb (2.7kg) MODEL DESCRIPTION 17850-1012 12V DC, fuse included Do-It-Yourself Oil Changer Flat Tank Oil Changer System The Jabsco Flat Tank Oil Changer System simplifies the engine oil changing process. Ideal for changing engine oil in boats, RVs, lawn and garden equipment. There is no need to worry about open containers causing spills when changing engine oils with the 3-1/2 gallon (13L) compact self-contained unit fitted with a self-priming diaphragm pump with an easy-pour spout for emptying. The Flat Tank design allows for easy storage in deck boxes, boat storage lockers or RV storage compartments. Easy to use, clean and efficient dipstick suction tube, battery clamp wire leads and on/off pump switch. • Stores easily. • Compact, robust tank design. • Easy-pour spout with screw-on cap. • Easy-to-carry handle. • 3-1/2 gallon (13L) sealed container. • Self-priming, run-dry pump. • Battery Leads: 6' (1.8m) with alligator clips. • Suction Tube: 8' (2.4m), oil and heat resistant. • Powerful 12V DC motor makes oil changing quick and simple. • 6' (2m) electrical wire for easy connection to 12 volt power supply. • Battery clamp leads and on/off switch to make pumping process quick and simple. SIZE 12" wide x 19" high x 6.5" deep (30.5cm x 48.3cm x 16.5cm) WEIGHT 7lb (3.17kg) MODEL DESCRIPTION 17860-2012 12V DC, fuse 5 amp 65 07 Oil Change & Diesel Transfer Pumps Oil Change Pumps