Jabsco Pump Catalog

A non-return valve can be used to help prevent waste backflow on electric toilets. Simply fit discharge hose close to the toilet. MODEL DESCRIPTION 58109-1000 1-1/2" (38mm) Outlet Non-Return Joker Valve Outlet Non-Return Valve A check valve gives quicker and easier flushing response on many manual and 37010 Series Electric Toilet installations. • For use with manual and electric toilets using sea water flush. • Simply fit inlet suction hose near seacock, but just above waterline. • Prevents loss of prime in above-waterline installations. • Retains water in bowl of 37010 Series Electric Toilets installed above waterline. FITTING Connections for 3/4" (19mm) ID hose SIZE 4-1/4" long x 2-1/8" wide x 2" high (10.8cm x 5.5cm x 5cm) WEIGHT 0.25lb (0.1kg) MODEL DESCRIPTION 29295-1011 Inlet Non-Return Valve Y-Valve Robust Y-Valve for use in toilet applications. Allows waste to be pumped overboard or into a holding tank. • Rotating ports allow for variable routing of hoses onto the valve. • Can be operated through bulkhead by use of optional handle extension. • Can be padlocked so that waste can only go to the holding tank to comply with some local regulations (padlock not included). • Waste and corrosion-resistant construction throughout. FITTING Connections for two 1-1/2" (38mm) ports and 1" (25mm) inlet port SIZE 7-5/8" long x 7-1/4" wide x 4-5/8" high (20cm x 19cm x 12cm) WEIGHT 2lb (0.9kg) MODEL DESCRIPTION 45490-1000 Y-Valve 45500-1000 Handle Extension Kit 45493-0000 Replacement Handle 18753-0661 Replacement Ports Kit 45488-0000 Service Kit Inlet Non-Return Valve Vented Loops An essential safety component on all inlet and discharge plumbing of toilets installed below the static or heeled waterline. • Simple valve system ensures water cannot siphon over plumbing loops. • Available in three sizes for 1-1/2" (38mm), 1" (25mm) and 3/4" (19mm) ID hose. • Internal valve avoids need for external venting. • Molded in tough, corrosion-proof plastic. FITTING Connections for 3/4" (19mm), 1" (25mm) and 1-1/2" (38mm) ID hose SIZE 3/4" (19mm) Model: 3" high x 3-3/4" wide x 1" deep (7.5cm x 9.5cm x 2.5cm) 1" (25mm) Model: 5" high x 7-1/2" wide x 1-3/4" deep (12.5cm x 19cm x 4.5cm) 1-1/2" (38mm) Model: 5" high x 7-1/4" wide x 2" deep (12.5cm x 18.5cm x 5cm) WEIGHT 3/4" (19mm) Model: 1.5oz (0.04kg) 1" (25mm) Model: 0.25lb (0.13kg) 1-1/2" (38mm) Model: 0.5lb (0.2kg) MODEL DESCRIPTION 29015-0000 3/4" (19mm) model 29015-0020 1" (25mm) model 29015-0010 1-1/2" (38mm) model 29015-1000 Replacement valve. Only available in Europe. 48 04 Toilet Systems ACCESSORIES