Jabsco Pump Catalog

LP900S LOW PROFILE BILGE PUMPS FOR TIGHT SPACES Designed to bring pumping power to tight spaces, Rule’s LoPro Series Bilge Pumps are only 2.4 " (6cm) high. The LP900S model features two automated modes. The first one engages the pump when the water level reaches 2 " (5cm) or 1.3 " (3.25cm) (user choice); and the second one checks for water by briefly turning on the pump every 2-1/2 minutes. The LP900D model uses a traditional float and/or panel switch for operation. FEATURES AND BENEFITS • Multiple modes of operation. The LP900S features two automated modes of operation. • High or low water sensing mode. The pump starts when water reaches 2 " (5cm). By turning the motor cartridge upside down, the sensor is at 1.3 " (3.25cm). • Electronic automatic mode. The pump automatically turns on every 2-1/2 minutes to check for water, and if it’s detected, the pump stays on until the water is gone. • Fully rotating discharge body. The entire body swivels up to 180º, making for an easy plumbing installation. • Threaded discharge nozzle. Multiple ports are available for this pump: 3/4" (19mm) straight, 3/4" (19mm) right angle, 1" (25mm) and 1-1/8" (28mm). • All ports are included in the aftermarket package. • New tricuspid check valves help prevent backflow. • Horizontal or vertical mounting. The LP900S and LP900D feature a variety of mounting options to accommodate a boat's bilge. LoPro Bilge Pumps CAPACITY GPH (LPH) MODEL NUMBER VOLTS AMPS @12V AMPS @13.6V FUSE SIZE HEIGHT INCHES (mm) WIDTH INCHES (mm) LENGTH INCHES (mm) HOSE DIAMETER INCHES (mm) PANEL SWITCHES FLOAT SWITCHES Automatic 900 (3407) LP900S 12DC 4 5.2 7.5 2.4 (60) 2.4 (60) 9 (228) Multiple 42, 44, 45 — Standard 900 (3407) LP900D 12DC 4 5.2 7.5 2.4 (60) 2.4 (60) 7.12 (180) Multiple 43, 45 35A, 37A, 40A LP900D 13 02 Bilge Pumping Systems Electric Submersible Pumps