BARR Marine Catalog

82 Exhaust Risers and Connectors riser; 8 1/2” riser protection. Re- 20-0000 Swivel-type high discharge exhaust quires (1) mounting hardware kit # 20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose. 20-0002P Mounting hardware kit. 20-0031 Swivel-type 90 degree exhaust elbow connector with internal water dis- charge. Accepts 2 1/2” to 3” I.D. ex- haust hose. Requires (1) mounting hardware kit # 20-0002P per elbow. 2 1/2” I.D. exhaust hose) or exhaust 20-0034 or 20-0035 Exhaust connector # 20-0035 (for connector # 20-0034 (for 3” I.D. ex- haust hose). Connects to # 20-0039 using (1) # 20-0002P per connector. 20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits # 20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows # 20-0034 or # 20-0035 to riser). 20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Re- quires (1) mounting hardware kit # 20-0002P per elbow. 20 0000 20 0031 20 0055 20 0039 20 0002P 20 0035 20 0034 Note: A header adaptor style end cap must be installed on the exhaust end of the log manifold in order to mount these risers or elbows. See the “Manifold End Plate and Gasket Identification Listing” page at the begin- ning of this catalog for the proper end plates specific to your aplication.