BARR Marine Catalog

31 Interceptor V8-221, 260 and 289 C.I.D. Models 120, 140, 165, 190, 200 and 210 H.P. LOG STYLE GENERIC Port side part # INT 1 6268L 20-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit # 20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose. 20-0002P Mounting hardware kit (Barr style riser/elbows only). 20-0034 or 20-0035 Exhaust connector # 20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust connector # 20-0034 (for 3” I.D. ex- haust hose). Connects to # 20-0039 using (1) # 20-0002P per connector. 20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2) mounting hardware kits # 20-0002P ((1) kit to mount riser to manifold and (1) kit to mount elbows 20-0034 or 20-0035 to riser). 20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts 2 1/2” or 3” I.D. exhaust hose. Re- quires (1) mounting hardware kit # 20-0002P per elbow. 20 0000 20 0031 20 0055 20 0039 20 0035 20 0034 INT-1-6268L Water cooled exhaust manifold (port) for the Ford engine. Use with Barr INT-1-6268P Manifold to cylinder head mounting kit. risers and connectors. The original Interceptor exhaust connectors are not applicable to the Barr manifolds. INT-1-6268R Water cooled exhaust manfold (star- board for the Ford engine. Use with the Barr risers and connectors. The original Interceptor exhaust con- nectors are not applicable to the Barr manifolds. 1-0022 End plate gasket (will fit both ends). INT 1 6268R 20 0002P INT 1 6268P FM 47 0000 1 0022 20-0031 Swivel-type 90 degree exhaust elbow connector with internal water dis- charge. Accepts 2 1/2” to 3” I.D. ex- haust hose. Requires (1) mounting hardware kit # 20-0002P per elbow.