Hi all,
i have a 32.5 feet with 2 kad32p. The problem is that the sx engine goes in alarm for hight temperature
when the rmp is over 2800.
The temperature gauge shown a value just below 90°C see the photo.
I suppose there are 2 sensor (one for the gouge and one for the control pannel):
In this photo i see the thermostat cover and i suppose the sensor of the gouge.
The sensor of the alarm i suppose is the follow:
Is it correct my assumption?
What is the right temperature of this engine? Around 90 °C is too hight or is ok?
How can i check what is the problem?
PS: the temperature at cruise speeds around 22 knots remain stable and not increase. The dx engine 80°C and the sx engine 88°C
Many thanks for the help
i have a 32.5 feet with 2 kad32p. The problem is that the sx engine goes in alarm for hight temperature
when the rmp is over 2800.
The temperature gauge shown a value just below 90°C see the photo.
I suppose there are 2 sensor (one for the gouge and one for the control pannel):
In this photo i see the thermostat cover and i suppose the sensor of the gouge.
The sensor of the alarm i suppose is the follow:
Is it correct my assumption?
What is the right temperature of this engine? Around 90 °C is too hight or is ok?
How can i check what is the problem?
PS: the temperature at cruise speeds around 22 knots remain stable and not increase. The dx engine 80°C and the sx engine 88°C
Many thanks for the help