Logo

Recommendation for Faucet mixer

Swan74

New member
Hello!
We have made compartment for Scandvic 10411 Mixing Bridge, according to the measurements posted on their site. It turned out measures are wrong. So, now we have compartment for the mixer that should be 75 mm high, and in reality it is 101 mm high, and therefore it can not be implemented. Any recommendations for other Faucet mixer supplier? Thanks in advance.
 

makomark

Silver Medal Contributor
That height is going to be tough to find many options for...

option 1 - rework the compartment

option 2 - maybe look at the Whale Pumps products...they used to make a low profile mixer
 
Top