Logo
FULL SITE MENU

Honda BF225 2003

G

graham_clarke

Guest
"Hi all
we need to calibrate

"Hi all
we need to calibrate our trim to the guage. We have two engines, one is out e.g. reading low on the guage when its level with the other engine.
We beleave its possible to ajust the reading.
Thanks to any one who can help."
 
"Hi Guys
Two Honda BF225 &#40

"Hi Guys
Two Honda BF225 (2003)}engines on a 9 metre RIB.
We have problem with one engine not going over 4,500rpm and the V tec not coming in. Our machanic has adjusted the cables and the butterflys are fully open.But to no avail. The starboard engine is trying to go but without the port engine to help its being held back. The poorly engine is also useing a lot more fuel than the other, e,g, if we put 200 ltrs in the starboard tank we will put 220 in the port.
We live in Spain and the Honda machanics are not up to speed on this engine so any help we can pass onto him would be much apprceciated.}"
 
Back
Top