Logo
FULL SITE MENU

Search results

  1. M

    Engine locked

    Thanks everyone for your help with this one. It was the plastic Venturi which had fallen into the engine . Just trying to work out the least invasive way to get it out ?
  2. M

    Engine locked

    Thanks so much
  3. M

    Engine locked

    Thanks
  4. M

    Engine locked

    So flywheel pulled off no problem. However Im no further forward. Surely being able to turn it 180 degrees one way then back again must mean something ?? Surely I don't have to dismantle the whole engine ??
  5. M

    Engine locked

    Thanks of course
  6. M

    Engine locked

    👍
  7. M

    Engine locked

    Trying to remove the flywheel. Is the nut R hand or L hand ?
  8. M

    Engine locked

    OK thanks yes it was running hot and in fact the owner melted the top of the water pipe plastic flange where it connects with the powerhead. No noises before shutting down and as I said it turns freely unto 180 degrees so its not seized.
  9. M

    Engine locked

    Thanks by hand the starter rope system I removed to exclude an issue with that. So I’m simply gripping the red flywheel by hand
  10. M

    Engine locked

    Thanks but this is happening with the power head removed from the leg so it’s got to be a power head problem??
  11. M

    Engine locked

    Scotland. It was running fine 3 weeks ago. I was just replacing the water impeller so this happened on reassembly. Feels like its jamming on something, v strange
  12. M

    Engine locked

    Hi thanks so the powerhead is now off and the plugs out. I can only turn the flywheel 180 degrees either direction ??
  13. M

    Engine locked

    Thanks yes it’s a 9.8 hp . It wouldn’t turn over when I had the power head off
  14. M

    Engine locked

    Hi Ive been doing some work on my mercury 110. having put the powerhead back on I now find I can't turn the engine over at all. Completely locked. Ive checked the gear shifter position and removed the plugs but its completely solid ?? Any ideas please ? Jon
  15. M

    Mercury 110 (9.8) Water pipe?

    I’m in Scotland I’m in Scotland where are you
  16. M

    Mercury 110 (9.8) Water pipe?

    Thanks can you expand on that please
  17. M

    Mercury 110 (9.8) Water pipe?

    sorry not sure these photos are uploading ?
  18. M

    Mercury 110 (9.8) Water pipe?

    Thanks Ive attached a couple of photos. As you can see the rubber seal is flush with the cowl flange but then the spacer sits proud . Do you just rely on the block bolts forcing the spacer by compressing the rubber seal ? J
  19. M

    Mercury 110 (9.8) Water pipe?

    Thanks the problem is the black rubber seal is flush with the face of the cowling leaving no room to fit the spacer in ??
  20. M

    Water tube spacer and seal fitting Mercury 110

    Hi my outboard overheated and melted the plastic fitting where the water tube connects with the powerhead. Ive now got a new spacer and seal. The seal has a flat surface and a recessed one. Which way round does it go ? Should it be flush with the lower engine cowl ?
Back
Top