Logo
FULL SITE MENU

Search results

  1. G

    Wiring Problem on 50 LPDI

    I have a 2000 Tohatsu 50 LPDI that was in storage for several years. It ran perfectly prior to crating it for storage. While in storage, someone got in there (commercial rental locker) and stole the control with cables. I couldn't find a part # - apparently the same control works for all - so...
  2. G

    '93 Johnson 25 hp not Getting Enuf Gas

    Along with my '83 Johnson 15, I've been tussling with a fuel problem in my '93 Johnson J25TEETS and it's giving me fits. The motor starts and runs fine....up to about 2,000 rpm....and won't go any higher. Idle along and it's fine. Hit the gas and it'll give a big boost and start to lift onto...
  3. G

    Johnson 25 hp Manual Tilt Problem

    I also have a '93 Johnson J25TEETS that is about ready to go but I have a question about the tilt mechanism. It has the lever on the right side by the mounting bracket. Flip the lever down and tilt the motor up - all the way up - and the right side lock will snap into place. The left side...
  4. G

    89 Johnson 15 Won't Start

    I have a J15ECP that was running fine until I "improved" it. It was looking pretty ratty under the cowling, with a lot of missing paint, so I pulled the coils and wire bundle loops, etc. and masked off a lot of it, then rattle canned it. First with self-etching aluminum primer, then with...
  5. G

    Lost Post

    I signed up for the forum this morning and posted a question about my 1989 Johnson 15 not starting. I've looked, can't find my message and not familiar with the forum format. Is there a way to tell if I posted it in the wrong place ??
Back
Top