1960 3 HP Lightwin Carburetor needle sticking

[Data]

I've tried cleaning the needle valve hole, twisting the rubber tipped needle valve with emery paper...still sticks. Is there anything else I could do? Could I replace the rubber tipped valve with a steel tipped valve? Is there something particular I could do to clean the hole? Did they originally come with a rubber tipped needle valve?

 

[racerone]

Is the clip on the needle to pull it down?---=-Did you install float upside down ?

 

[Data]

Well, the float is correct, but that's twice now I've had a "spring" mentioned to pull the needle down. But there is no spring and none shown in the 1960 3034 parts diagram. If I got the kit (comes with a spring) from marineengine.com would it even fit properly (since the parts diagram shows none)?

 

[racerone]

Yes ----It should fit.-----It was not used in 1960.----Certainly used on MANY motors now.

 

[Data]

Looks like I need a different needle valve too (no notch in mine)