Logo
FULL SITE MENU

Mercruiser Gen III Cool Fuel Module Replacement

adams1354

adams1354

New member
Hi. Started the motor for the first time this season, all good except I noticed water coming out of the bottom of the fuel module. After using my fingers to try and detect where the water was coming from and using a mirror and my phone for pictures, I determined the leak was coming from the housing. Did my research and removed the entire unit. Yup! found a crack in the bottom of the housing. My boat is a 2007 Crownline with a Mercruiser 350 Mag MPI 5.7L. Engine serial number "1A041321". Can some one help me identify the correct replacement module for the unit?

IMG_8013.jpeg

IMG_8014.jpeg

IMG_8015.jpeg
 
Here’s your engine parts,

Mercruiser (5.0l,350 Mag,mx 6.2l Mpi Sterndrive) Engine Components

www.marineengine.com www.marineengine.com

Your cool fuel module item number 1,

Fuel Supply Module, Bravo for Mercruiser (5.0l,350 Mag,mx 6.2l Mpi Sterndrive) Engine

www.marineengine.com www.marineengine.com


And some info to help find another one,

Dave Crawford Marine - SMC-09-01 17-FEB-09 NEW GEN III COOL FUEL MODULE

View catalogue documents including SMC-09-01 17-FEB-09 NEW GEN III COOL FUEL MODULE at Dave Crawford Marine
shop.davecrawfordmarine.co.uk shop.davecrawfordmarine.co.uk

New Mercruiser Gen III Cool Fuel Module - Service Bulletin | PerfProTech.com

PPT is the #1 online source for Mercury Mercruiser Gen III Cool Fuel Service Bulletins and other Mercruiser technical product information.
www.perfprotech.com

www.ebay.com

MERCRUISER COOL FUEL MODULE HOUSING 892664 892664T01 8M0047216 | eBay

Find many great new & used options and get the best deals for MERCRUISER COOL FUEL MODULE HOUSING 892664 892664T01 8M0047216 at the best online prices at eBay! Free shipping for many products!
www.ebay.com
 
fyi when replacing the module with the new one, the hoses that cool it will not be long enough to connect to thenew barbed fittings so you will need a length of 1/2" heater hose and 2 connectors.
 
adams1354 said:
Hi. Started the motor for the first time this season, all good except I noticed water coming out of the bottom of the fuel module. After using my fingers to try and detect where the water was coming from and using a mirror and my phone for pictures, I determined the leak was coming from the housing. Did my research and removed the entire unit. Yup! found a crack in the bottom of the housing. My boat is a 2007 Crownline with a Mercruiser 350 Mag MPI 5.7L. Engine serial number "1A041321". Can some one help me identify the correct replacement module for the unit?

View attachment 30277

View attachment 30278

View attachment 30279
Click to expand...
I have the same problem and have not been able to locate one anywhere. I saw there might be a replacement part 8M0047215 but it is $1,792 ! And not sure it is the right part? Seem crazy that there are thousands of these motors out there and it is a discontinued part.
 
the link boat tech listed shows the different revised kits. they discontinued the one you have becuse of a problem with the cooling ability. they revised the module. you can cross reference your modul based on the serial # of your engine .. once you have that part #, you can find the correct revised module and yes, they will cost $1700.oo
 
chs said:
the link boat tech listed shows the different revised kits. they discontinued the one you have becuse of a problem with the cooling ability. they revised the module. you can cross reference your modul based on the serial # of your engine .. once you have that part #, you can find the correct revised module and yes, they will cost $1700.oo
Click to expand...
Thank you, I have been trying to cross reference but haven't found the exact. I will doeg deeper now that you shared that. Thanks again
 
per the service bulletin you need
Replacement kits Complete Gen III module with pumps and filter 8M0047215

if you have 3 hoses coming from the supply hose coming out of the supply hose, you also need
Three bib hose kit 865208T02
41tcCR0L3VL._AC_SL1205_.jpg

good news is that the new pump kit has a drain plug that is actually accesible,

you can also get just the housing and transfer the parts inside . that kit is
Lower Gen III module housing (no pumps or filter) 8M0047216
 
chs said:
per the service bulletin you need
Replacement kits Complete Gen III module with pumps and filter 8M0047215

if you have 3 hoses coming from the supply hose coming out of the supply hose, you also need
Three bib hose kit 865208T02
View attachment 30501

good news is that the new pump kit has a drain plug that is actually accesible,

you can also get just the housing and transfer the parts inside . that kit is
Lower Gen III module housing (no pumps or filter) 8M0047216
Click to expand...
Yes, that is what I determined except on back order till middle of June. Also very expensive. :(
 
Back
Top