Logo
FULL SITE MENU

Recent content by manther

  1. M

    Motor guide friend.

    So I just wanna learn what went wrong so I can avoid it happening again. Went out and used the trolling motor for the 4th time since buying the boat. Operated as usual. Except this time I tried the fastest speed "5". Tried it for about 15 seconds. Then went about fishing. Next time I tried to...
  2. M

    New to me 84' 25xd no run.

    www.cdielectronics.com is a cool resource, thanks for that. I found my section. It looks like we basically troubleshot from the coil going backwards, while they begin their troubleshooting from the stator going forward. So I can go out and buy a DVA adaptor and troubleshoot their way. Or if...
  3. M

    New to me 84' 25xd no run.

    Want to make sure I do this test correctly. See attached pictures. Service manual says: "Disconnect the leads with their quick disconnect fittings." And the appendix says: "tester leads go between the trigger leads." So are the trigger leads the two posts the two green wires are connected to...
  4. M

    New to me 84' 25xd no run.

    The rings press in and spring back out. Tested spark, I found the #2 had weak spark when I first started testing, then after a few key bumps it stopped sparking altogether regardless how far the gap was set on my tester. So I need to go through the no spark troubleshooting sequence. One guy...
  5. M

    New to me 84' 25xd no run.

    Hi, I'm new here. Nice forum. I just picked up a new to me 25xd. Serial 6535516 It ran with earmuffs in sellers yard. When it was warmed up it had 120+ compression in both cylinders. Drove it 2 hours home, and it won't run anymore. Here's the symptoms. If having sat for a ling time (hours)...
See more
Back
Top