Logo
FULL SITE MENU

Recent content by JLM1979

  1. J

    Honda BF60A Fuel Pressure Issue **Please Help**

    I also test the compression of the motor and that was fine. Would an O2 sensor cause fuel pressure issues? I checked the ohms of the heater side of the O2 sensor and it was low and out of spec.
  2. J

    Honda BF60A Fuel Pressure Issue **Please Help**

    I took off the VSP and cleaned everything and inspected the grommet. It looked fine. I was not deformed or damaged from what I could see. I have the tech manual for the outboard and Honda says the standard pressure should be around 40 PSI with the vacuum line attached to the regulator and...
  3. J

    Honda BF60A Fuel Pressure Issue **Please Help**

    I have a Honda BF60A outboard. The motor runs fine when not under load (in water) but once under load in water it stalls out. I checked the fuel pressure and it was low ~35 PSI pointing to the fuel pressure regulator. So I installed a new regulator. After installing the regulator I...
See more
Back
Top