Logo
FULL SITE MENU

Recent content by J.Clinker

  1. J

    1985 Evinrude 2 stroke

    Thanks Tim, glad you enjoyed your trip here, driving on the opposite side is always tricky for a few days. Yes salt water down here.
  2. J

    1985 Evinrude 2 stroke

    Hello Tim, Thanks for your thoughts, I understand things more clearly. The anti seize is a good idea. I will try better photos of the power head in case it may reveal identification. After learning where both Edcriss and yourself are from I wonder if Evinrude Australia had the same production...
  3. J

    1985 Evinrude 2 stroke

    Hello racer one, are you able to distinguish anything from the photos that may lead to a solution for me? Many thanks John
  4. J

    1985 Evinrude 2 stroke

    Hello, success with the photos, thanks. A summary as I think: I have a drive shaft pre 1984. A mid section 1985. The rest to be figured out.
  5. J

    1985 Evinrude 2 stroke

    Some other shots.
  6. J

    1985 Evinrude 2 stroke

    Thanks Edchris177, great photo too! Let’s have a go
  7. J

    1985 Evinrude 2 stroke

    One more try!
  8. J

    1985 Evinrude 2 stroke

    I am trying to attach that photo.
  9. J

    1985 Evinrude 2 stroke

    Racerone, Hello, if after 1984 evinrude used a seal and not an O ring did they keep using the same drive shaft as mine in the attachment? What I am wondering is, should I, it being an 1985 expect it to seal when assembled? Thanks John
  10. J

    1985 Evinrude 2 stroke

    I seem to mucked replys up apologie.
  11. J

    1985 Evinrude 2 stroke

    racerone I cannot see the serial # on the power head ? Some observations though : the rubber seal/grommet on the high side of the pump housing was stopping the fitting together of the gearbox and mid bodies. Looking at the original one it had been cut down by 3 or 4 mls. The replacement pump...
  12. J

    1985 Evinrude 2 stroke

    racerone I cannot see the serial # on the power head ? There are some photos of the motor that may help. Some observations though : the rubber seal/grommet on the high side of the pump housing was stopping the fitting together of the gearbox and mid bodies. Looking at the original one it had...
  13. J

    1985 Evinrude 2 stroke

    OOPS, it is a 15hp , E15RCOB.
  14. J

    1985 Evinrude 2 stroke

    I seek your advice. I have fitted a water pump kit and started to assemble the gear case to the body, it felt a little jammed just as the gear shift shaft reached the connecting clamp so I pulled it out just to check that all was ok. The O ring at the motor end of the drive shaft just below...
  15. J

    1985 Evinrude 15 HP

    I might just add how reassuring it is to have experienced helpful people like yourselves online to assist.
See more
Back
Top