Logo
FULL SITE MENU

Recent content by Hutchy

  1. H

    Fuel pump flow rate

    I took the pump apart today, to inspect and make sure there wasn’t a torn diaphragm or something obstructing the flapper; everything was clean and looked good. There was some oil on the plunger side of the diaphragm though. Is that normal?
  2. H

    Fuel pump flow rate

    It won’t let me upload any videos, even an 8 second clip is “too large”. I went to measure the flow rate afterwards and when I removed the line feeding the carburetor and put it in a bottle, it wouldn’t stop flowing (despite not cranking) just static draw? So does that mean the pump is purely to...
  3. H

    Fuel pump flow rate

  4. H

    Fuel pump flow rate

    I do run system dry for winter storage and only run 91 octane. When replacing the internal o rings, in the carburetor, I also disassembled everything and gave it a good soak and cleaning. All orifices are clear. When fuel is sprayed into the chambers, the motor wants to start, but with no fuel...
  5. H

    Fuel pump flow rate

    I could use some help in diagnosing my ‘19 Merc pro kicker, 4 stroke (carb), serial OR664339. When I took it out of storage it didn’t want to start. Noticed the primer ball wasn’t keeping its prime, started looking along the system and noticed there was a split in the line at the carb~ repaired...
See more
Back
Top