Logo
FULL SITE MENU

Recent content by Gilera

  1. G

    Power pack for Johnson "commercial" 2hp - can I use one from another motor?

    As the title suggests I have one of these Chinese made Johnson 2hp. 2001 model. After replacing the head gasket and cleaning out the cooling channels I took it out for my first run with it. After 5 mins it quit. No spark. Coil is good. Plug and lead are good. Kill switch good. I think it is the...
  2. G

    DVA adapter vs DVA analog meter for sensor and coil wire testing

    I gave up trying to get the reading from sensor wires to gnd and orange wires to gnd. Seems this may be a typo. I returned the DVA adapter i bought because it didnt seem to have any advantage over my homemade one.
  3. G

    DVA adapter vs DVA analog meter for sensor and coil wire testing

    Thanks. It seems like i've been on a wild goose chase trying to get that reading from white/black and black/white wires to gnd.
  4. G

    DVA adapter vs DVA analog meter for sensor and coil wire testing

    Hi, I have a few 1970's V4 crossflows. Part of the ignition troubleshooting is to measure the output from sensor wires to gnd and orange coil wires to gnd. These are supposed to be 150V. I have never got this to work using my homemade DVA adapter. It seems to work fine for stator measurement and...
  5. G

    2001 Johnson 2hp head torque values please

    M6 x 32mm. 80in lbs is less than 10ft lbs. Maybe I am overtightening them then.
  6. G

    2001 Johnson 2hp head torque values please

    I have a J2RTVSIA (hong kong OMC 2hp "commercial"). I had to remove head to clean out water passages which were blocking the telltale. I got a new head gasket but the head bolts are NLA. I tried to reuse the original but I sheared 2 of them just trying to torque to 10ft lbs. They seem to be made...
See more
Back
Top