Logo
FULL SITE MENU

Recent content by Emann1981

  1. E

    V4 130 looper double firing on bank 2

    I marked TDC for each cylinder on the flywheel. When I hook up a timing light to the plug wires on cylinders 2 and 4 they both show to be firing on both cylinders 2&4 at TDC. As in what i see when the light flashes is a mix of the numbers 2&4 flashing. Its really weird. Cylinders 1 and 3...
  2. E

    1996 evinrude 130 bogs and loses multiple cylinders. Stalks and dies at high rpm

    1996 evinrude 130 v4. 130psi across all cylinders. Freshly cleaned carbs. Fire on all cylinders . I can keep fuel to the carbs with the hand pump so I know its not starving for fuel. It will start and idle then start to sputter like it lost fire on a cylinder. When I put it in gear it will...
  3. E

    1996 evinrude 130. Broken head bolt

    Replacing head gaskets on the 1996 evinrude 130. I twisted the head off of 1 bolt. I was able to remove all the other bolts without a problem. The problem I'm having is that the stud of the broken bolt is still rusted and stuck in the hole and holding the head in place so I can't get the...
See more
Back
Top