Logo
FULL SITE MENU

Recent content by Cameronrd

  1. C

    Valve clatter and exhaust leak noise with new head

    Replaced a head on a 5.0L ford HO. Original head was cracked. Also removed other head, had the springs checked, new valve stem seals and milled flat (.006 removed). Reassembled with new exhaust manifolds and elbows. On the side with the new head, was experiencing what sounds like a valve...
  2. C

    vavle adjustment for 1993 OMC with 5.0 HO (Ford)

    Had to replace cracked head and also replaced exhaust manifolds and elbows. Adjusted the lifters by feeling for the zero lash in the push rods and then tightening 1/2 turn. Lifters were dry after sitting for 9 months and was touchy to feel for the zero lash. Engine started but ran extremely...
See more
Back
Top