Logo
FULL SITE MENU

Recent content by Brunnerz

  1. B

    Clueless newbie need advice!

    Ok yeah thanks. I mean it looks pretty broken even to my untrained eye. I’ll get a new cable and see if I can fit it! Cheers mate.
  2. B

    Clueless newbie need advice!

    Hi which video are you referring to? The cam roller one (second one?) or the cable? Thanks
  3. B

    Clueless newbie need advice!

    The cam follower
  4. B

    Clueless newbie need advice!

    Not as far as I can see… but maybe. I’ll look again and try and get a good picture
  5. B

    Clueless newbie need advice!

    That’s a link to a video detailing the issue
  6. B

    Clueless newbie need advice!

    Another problem now (of course) it won’t rev. Twisting the tiller handle causes the wire to move backwards and forwards. The cable pulls the plastic link rod and returns the cam plate to idle but it just won’t push the cam plate forward to open the throttle… any ideas? At least it’s running now...
  7. B

    Clueless newbie need advice!

    Thank you!! It’s fixed! Haha!!! The mighty Johnson lives! All I had to do was rotate that thing and snap the rod back on and we’re cooking! Honestly, can’t thank you enough. You’ve just saved me £3000 for a new outboard.
  8. B

    Clueless newbie need advice!

    Hi thank you so much for the reply. As it stands, no matter if the throttle is open or closed, the rod is too long to get it on to ‘A’. So I assume I need a connector, is the carb follower and roller the part I need? I’m hoping the rod attaches to the follower and that clips on to A….
  9. B

    Clueless newbie need advice!

    Hi everyone, I’m sorry if this is really simple but basically I have a 15hp year 2000 Johnson which was factory restricted to 10hp. It’s a rope pull start, model number J10RGTSSS. The starter rope snapped so I tried the emergency start by winding a rope on to the notches on the flywheel. It...
See more
Back
Top