Logo
FULL SITE MENU

Recent content by beb123

  1. B

    What length bolts for Mercruiser starter?

    The image got me thinking - here is the new starter with the old bolts. There is a knurled part that extends out, which is what made me think that the bolts are too long. But the drawing above shows a portion of the hole in the engine mount that the knurled part goes into - I'd assumed it was...
  2. B

    What length bolts for Mercruiser starter?

    I have a Mercruiser in my Ski Centurion v-drive. Not sure exactly what engine it is - presumably the standard (5L?). I got some water in the bilge so decided to swap out the starter as it's likely to fail sooner or later. Originally it had a small form factor starter, I'd replaced it with a...
  3. B

    Bolt length for Mercruiser starter?

    I have a Mercruiser in my Ski Centurion v-drive. Not sure exactly what engine it is - presumably the standard (5L?). I got some water in the bilge so decided to swap out the starter as it's likely to fail sooner or later. Originally it had a small form factor starter, I'd replaced it with a...
  4. B

    Yamaha 150 4 stroke hesitates

    Hi - I have a F150C 4 stroke Yamaha on my bass boat and have trouble with it hesitating under load. As I apply throttle from a start it bogs down around half throttle. If I back off and very slowly throttle up and/or wait for the boat to eventually get on a plane I can get it going, after...
See more
Back
Top