Logo
FULL SITE MENU

Recent content by 92wahoo

  1. 9

    Honda BF130 water temp

    I just installed a reconditioned cylinder head and in the process replaced the thermostat and cleaned out the water jackets and replaced internal annodes. I have only ran the motor on ear muff since I put it back together. My question is that the top of the head especially the thermostat and...
  2. 9

    Honda BF130 head bolt part number?

    Help! I need the correct part number for the 10 big head bolts that stretch when torqued. The ones I received from boats.com are the smaller ones and we can not find the correct part number? Can I use new ones for a Honda car and if so what year, model should I ask for?
  3. 9

    Should I use Permatex copper head gasket sealant on my new BF130 head gasket?

    Looking for guidance again, the head will be redone as I am having a machine shop go through it however the block I can only clean as is so is it advisable to use a sealant on the new head gasket? Not sure it the new gasket will come pre coated with a sealant? 1999 BF130
  4. 9

    BF130 case crack locations on my motor

    Photos of Cracks that go from the exhaust chamber through to the webbing in the center section of the water jacket that I had welded up. Thought I would share just in case anyone with a BF130 wanted to pull water jacket cover to investigate. Be prepared to tap & helicoil any water jacket cover...
  5. 9

    Honda bf130 valve adjustment questions

    Hello, hoping someone can confirm the proper sequence to adjust valves on a bf130. The Manual is a bit confusing. Manual says to go to "T"for TDC to adjust #1 then rotate clock ways to #2 and adjust, and then to 3 & 4 but after 2 is #4 and then #3??? So the pulley goes "T for 1, then 2, then 4...
See more
Back
Top