PDA

View Full Version : Power tilt 125 Force



wayne
11-18-2003, 09:11 PM
My power trim and tilt leaks down on its own no oil leak I was wondering if anyone knows what the best thing to do other than replace the complete unit.Thanks

chris
12-01-2003, 04:38 PM
" Wayne, It might be the trim cylinder's internal piston seal, or the hydraulic valve in the pump. My bet is on the internal piston seal. See if it can be tested. "

mike rivera
05-11-2004, 10:53 PM
" If the hydraulic piston is damaged at all cuts, knicks, corrosion,and it is possible to rechrome and replace the packing depending on piston damage and cost.Check hydraulic shops in your local area. "