SeaStar Autopilot Pump
| CSS Drop Down Menu by PureCSSMenu.com | < Previous Page|Next Page > |
63
®
SEASTAR POWER ASSIST AUTOPILOT
TECHNICAL SPECIFICATIONS
Voltage
12 or 24 volts
Oil Compatibility
SeaStar Steering Fluid (MIL 5606)
Weight
4.9 lbs (2.2 kg)
Autopilot Pump Sizes
Type 1: 60 in
3
/min (no-load)
Type 2: 100 in
3
/min (no-load)
Maximum Pressure
1000 psi
Cylinder Capacity
Type 1: 4.9 in
3
- 12.5 in
3
Type 2: 12.5 in
3
- 21 in
3
SEASTAR AUTOPILOT PUMP:
The SeaStar Autopilot pump is a high efficiency,
fixed flow, reversible type Pump set producing very
little vibration or noise. It is offered in 12 and 24
volt configurations, as well as two different pump
sizes (type 1 & type 2). It can be used as a stand
alone pilot pump or can be mounted to a previously
installed SeaStar Power Assist unit and can prevent
the need to break into the hydraulic lines.
FEATURES:
Long life DC Motor (i.e. long life brushes).
Compact design.
Simplified installation.
Low power consumption.
ABYC, CE and J1171 compliant.
Superior corrosion resistance.
Quiet operation.
Mounting bracket included.
Stand alone or mounts to SeaStar Power Assist unit.
Replaces other 12 & 24 volt pumps.
COMPLETE SYSTEM
Type 1 - 12V - 60cu"/min
Type 2 - 12V - 100cu"/min
Type 1 - 24V - 60cu"/min
Type 2 - 24V - 100cu"/min
OPTIONS
SPA Retrofit kit
Nylon Return Line Required
Additional Steering Hose Required
Stand alone pilot pump - can be retrofit to
a Power Assist unit
STEERING - Outboard (Hydraulic)
SMARTSTICK (RFU)
MOUNTED TO SEASTAR
OUTBOARD CYLINDER
TO AUTOPILOT
CONTROLLER
TO AUTOPILOT
CONTROLLER
COMPENSATING
LINE
SEASTAR PILOT PUMP
(RETROFIT TO A
POWER ASSIST UNIT)
SmartStick AR4502
Only available for SeaStar Pivot Cylinder
See Page 148
