Logo

BayStar 1.4 Steering Kit (Cont.)

45
®
NOTES:
1. Requires Spacer Kit
Part No. HO5090.
2. Engine clamp brackets
must be cut or ground,
and the engine through
bolted onto the transom,
or interference will occur,
restricting engine trim
and tilt.
3. Steering hook Yamaha
Part No. 63D-48511-00-4D
must be installed.
4. Cylinder HC4645H may
be used in these applications.
The pivot plate will need to
be flipped before installation.
Instructions provided with
Owner’s Manual.
5. High performance 150HP
engines should use SeaStar.
ENGINE
MAKER/
CYLINDER
BRAND
YEAR
MODEL
PART NUMBER
NOTES
FORCE
1985–DATE
90–150 HP
HONDA
1992–DATE
30–90 HP
1998–2009
115–130 HP
2001–DATE
150 HP
SEE NOTE 5
2003–DATE
BF135 HP
JOHNSON / EVINRUDE
1977–1990
65–150 HP
1991–DATE
40–150 HP
1997–DATE
115 HP FICHT
SEE NOTE 4
1997–DATE
75–150 HP FICHT
SEE NOTE 5
1998–DATE
40–140 HP 4-STROKE
SEE NOTES 1, 4
MERCURY/MARINER
1984–DATE
75–150 HP
SEE NOTE 5
1998–DATE
40-60 HP
SEE NOTE 1
NISSAN
1990–DATE
120–140 HP
SUZUKI
1986–DATE
150 HP
SEE NOTE 5
1996 ONLY
115–140 HP
N/A
1987–2002
115–140 HP
SEE NOTE 1
1990–2000
90–100 HP
1998–DATE
40–70 4-STROKE
SEE NOTE 1
2001–DATE
115–140 HP 4-STROKE
SEE NOTES 1, 4
TOHATSU
1990–DATE
40–140 HP
YAMAHA
1998–DATE
40–50 HP
SEE NOTE 2
1998–DATE
60 HP
SEE NOTE 3
1986–DATE
70–90 HP
SEE NOTE 1
1997–DATE
80–150 HP 4-STROKE
2000–DATE
25–70 HP 4-STROKE
SEE NOTE 1
2010–DATE
115A & B
Note: Johnson 115 HP
2-stroke engines require
that the cylinder’s pivot be
flipped. See note #4 below.
BAYSTAR SINGLE ENGINE APPLICATION GUIDE:
CYLINDERS (HC4645H/47H/48H/58H)
HC4645H compact cylinder is included in the BayStar steering kits. This cylinder can be converted
to HC4658H by following instructions included with the product. If your engine requires use of
a cylinder other than HC4645H or HC4658H, please refer to the figure below for the appropriate
replacement pivot plate, which must be purchased separately. NOTE: read and understand all
related product instructions before performing any work on a hydraulic steering system.
*BAYSTAR CYLINDER PIVOT PLATES:
(Install onto HC4645H to
make HC4647H)
(Install onto HC4645H to
make HC4648H)
STEERING - Outboard (Hydraulic)