Logo

Top Mount Straight (CH4451P)/Raked (CH4481P)

198
CONTROLS - Single Function
®
TOP MOUNT STRAIGHT (CH4451P)
TOP MOUNT RAKED (CH4481P)
:
These stylish, low profile top mount control features
twin levers/single action with visual and tactile
throttle/shift identification. Available in chrome with
straight or raked handles and smooth throttle friction,
it can be used for single or twin stations. CH4400
controls accept 3300/33C type control cables and
are ideal drop-in replacements for older CH4500 or
CH4800 units. Additional hardware is required for
twin station use.
APPLICATION:
Single-function control — each lever controls throttle
OR shift. For single or dual station applications with
single or twin engines (one control per engine per
station utilizing an optional neutral safety switch
kit when required). Uses 3300/33C type universal
control cables. Not suitable for use with Mercury®
and OMC® OEM type control cables.
FEATURES:
Dual lever, single action for throttle & shift.
Dual station capability.
Stylish look with either straight or raked handles.
Positive detent for shifts.
Push or Pull to operate throttle and/or shift.
Includes hardware for two 3300/33C control
cables.
Optional neutral safety switch.
Adjustable throttle friction.
Removable knobs for recessed mounting.
Meets/exceeds all applicable industry standards.
SeaStar Solutions Recommends Using
Cables With This Control.
OPTIONS:
The Dual Station Transfer Unit from SeaStar
Solutions is recommended where long or difficult
cable paths make parallel installations costly and/or
difficult. When single function two lever controls are
used in a parallel, dual station application, some in-
stallations may cause the clutch or throttle levers to
operate “stiff”. Adding a transfer unit can improve
control performance in these cases.
ENGINE CONTROLS (CH4400 CHROME)
Chrome Finish, Straight Handles, Smooth
Friction (Throttle Friction/Shift Detent)
Chrome Finish, Raked Handles, Smooth
Friction (Throttle Friction/Shift Detent)
OPTIONS/SERVICE ITEMS
Optional Neutral Safety Switch
CH4400 Cable Hardware Kit
for single or dual station
This kit is for use with 3300/33C type universal cables only.
CH4400 Hardware Kit
CH4400 Cover (Black Plastic)
CH4400 Cover (Stainless Steel)
CH4400 Knob (Chrome Zinc Alloy)
CH4400 Knob (Black Aluminum)
CH4400 Knob (Red Aluminum)
Pivot Kit for CH5600P and CH4400
series controls
Dual Station Transfer Unit
NOTES: The adjustable smooth (resistance type) friction features
are for use with throttle control only. Use detents for shift. If
application is twin station, use detents on lower station only.
8.90"
5.32"
4.34"
3.02"
4.10"
7.45"
1.59"
.23"
6.50"
5.94"
40
DEG.
40
DEG.
5.94"
7.45"
4.10"
40
DEG.
40
DEG.
1.59"
.23"
6.50"
7.14"
4.34"
5.32"
3.02"
Pictured
Pictured
EASY ACCESS
COVER PLATE
(for lever friction
adjustment)