Single S (CH5210P)/Twin S (CH5200P)
||< Previous Page|Next Page >|
CONTROLS - Single Function
SINGLE S (CH5210P)
TWIN S (CH5200P):
This classic control is great for inboards, single or dual
station. The time-proven design of Twin S means
years of reliable operation. Accepts universal control
cables. Optional lever extension, detent kits and
neutral safety switch available. Additional hardware is
required for twin station use.
Single-function control — each lever controls
throttle OR shift. Ideal for inboards, stern drives and
outboards. The S controls are suitable for single or
dual station use. These single function engine controls
are available in both one or two-lever models. Both
S controls use 3300/33C and 4300 type cables. Not
suitable for use with Mercury® and OMC® OEM type
Highly polished stainless steel cover.
Simple, rugged, compact design.
Easily adjustable throttle friction and shift detent
Optional neutral safety switch to prevent starting
Optional hand lever extension.
Optional shift detent kit (if used in dual stations;
use on main station only).
Option throttle hold kit.
Uses 3300/33C and 4300 type cables.
Mechanical advantage - shift 2.77:1/throttle
Meets/exceeds all applicable industry standards.
SeaStar Solutions Recommends Using
Cables With This Control.
The Dual Station Transfer Unit from SeaStar
Solutions is recommended where long or difﬁcult
cable paths make parallel installations costly and/
or difﬁcult. When single function two lever controls
are used in a parallel, dual station application, some
installations may cause the clutch or throttle levers
to operate “stiff”. Adding a transfer unit can improve
control performance in these cases.
Single S (Old No. 031002-001)
Twin S (Old No. 031001-001)
Single S - Hardware & Bearing Kit
Twin S - Hardware & Bearing Kit
Single S - Handle Replacement
Twin S - Handle Replacement
Single S - Cover Replacement
Twin S - Cover Replacement
Clutch Detent Kit
In-Series Dual Station Kit, 3300/33C
(2 required for twin)
In-Series Dual Station Kit,
40 Series (2 required for twin)
Neutral Safety Switch Kit
Throttle Hold Kit (one per lever,
prevents throttle creep)
Ball Knob, Red
Ball Knob, Black
Stainless Steel Throttle Knob (grooved)
Stainless Steel Shift Knob (smooth)
Cable Mounting Hardware Kit 3300, Twin
Dual Station Transfer Unit
(see Connection Kits section)
** Fits most controls with 3/8-24 threaded levers.