MT-3 Single Lever (CH5310P)
||< Previous Page|Next Page >|
CONTROLS - Dual Function
MT-3 SINGLE LEVER (CH5310P)
MT-3 TWIN LEVER (CH5300P):
Ideal for inboards, stern drives and outboards, MT-3
combines classic binnacle control styling with dual
function levers, a neutral safety switch and an engine
warm-up feature! Control throttle and shift with one
lever instead of two. MT-3 Twin can control two
engines using the 3300/33C cables.
Dual-function control — each lever controls
throttle AND shift. Great for single station inboards
stern drives and outboards, single or dual engine.
Perfect for applications in which a binnacle control
appearance is desired, but one-lever throttle/shift
control is preferred. Also a great choice when space
is at a premium. This control uses 3300/33C type
cables (single and dual lever) and 4300/43 type
cables (single lever version only). Not suitable for use
with Mercury® and OMC® OEM type control cables.
Binnacle styling with the advanced features of a
dual-function control: one-handle engine
control, neutral warm-up.
Neutral safety switch to help prevent starting in
Mechanical advantage - shift 2.77:1/throttle
Can be used in a dual station application with
the DS unit.
Meets/exceeds all applicable industry standards.
SINGLE LEVER: Pull Shift, Push Throttle
MT-3 Single (Old No. 308601, 309075)
TWIN LEVER: Pull Shift, Push Throttle
MT-3 Twin (Old No. 308602, 309076)
SINGLE LEVER: Pull Shift/Throttle
MT-3 Single (Old No. 308731, 309077)
TWIN LEVER: Pull Shift/Throttle
MT-3 Twin (Old No. 308732, 309076)
Optional Neutral Safety Switch
Chrome Side Plate, MT-3
Ball Knob, Red
Stainless Steel Knob (red-grooved)
Hardware Kit for MT-3 single lever
Hardware Kit for MT-3 twin lever
43 Cable Heavy Duty Connection Kit
(Must be used when connecting a 4300/43CC or
4300/43BC cable to the control. (43 series cables can
only be used with the single-lever model.)
Engine Connection Kits
(see Connection Kits section)
NOTE: 4300/43 type cables cannot to be used on MT-3
Twin, as interference will occur.
Cables With This