Sierra Marine Parts Catalog: Accessories Miscellaneous
- Table of Contents
- Find Common Parts by Engine Brand
- Catalog Page Numbers
Replaces: Mercury 92-86166
2 Fluid oz.
Heavy Duty -36 ml.
Removable 36 ml.
Replaces: OMC 384848
OMC 388517, 500422
For 1/4" or smaller fasteners. Armature screws, float
For use on U-Joints, grease extension tubes, etc.
chamber screws, leaf valve screws, jet screws. A
Ignition component screws, fuel pump
High strength threadlocker is for use on fasteners
medium strength threadlocker that seals against
screws. Prevents loosening due to shock
which are normally not removed for service. (May
leakage and can be disassembled with ordinary tools.
and vibration. Prevents rust lock.
need to heat to 400°F (204°C) to remove)
KLEAN N PRIMETM
Mercury Master Gasket
High Strength 36 ml.
92-12564-1, 92-12564 2
OMC 324073, 327361
Cleans parts, activates surfaces and speeds cure.
For use with Threadlockers, Bearing Mount, High
Used to make, coat or repair gaskets in
Strength Retaining Compound, Gasket Maker and
High strength, permanent threadlocker for
minutes. Can be used in place of cut gaskets.
Pipe Sealant with Teflon.
heavy duty applications. (MASTER PACK 10)
ODC FREE CLEANER
80 ml. Tube
Replaces: OMC 390905
Color: Milky White/Clear
Seal, caulk and insulate electrical connections.
Best general purpose sealant for sealing flanges,
Clean parts before reassembly. Removes dirt, oil and
Remove old gaskets, paint and grime with Gasket
valve covers and flexible joints. Operating
solvent. Leaves no residue. Solvent is non-flamma-
Remover. Strips off hard carbon deposits. Eliminates
temperature to 400°F (204°C).
ble and low-toxicity. Cold degreaser.
harsh scraping that may damage a flange surface.
1 lb. can w/brush
16 fluid oz.
APPLICATION: Use on mechanical joints and external
Replaces: Mercury 92-802881A 1,
moving parts such as starter bushings, prop shaft
92-34227 1 (Perfect Seal)
splines and battery terminals. Dresses exhaust gaskets.
Coats and protects metal parts. Lubricates threads,
OMC 317201, 508235
APPLICATION:Gel sealant can be used in place of
gears, chains, cables, pulleys, rollers and pivots to
(Gasket Sealing Compound)
cut gaskets to seal cylinder block to crankcase half
temperatures up to 1600°F. (871°C) Heavy-duty,
on many current Outboard, Inboard and I/O models.
A slow drying, non-hardening brush-top
temperature resistant compound fortified with graphite
Used to make, coat or repair gaskets in minutes.
sealant. Gasoline, oil and grease resistant.
and metallic flake. Will not evaporate or harden.