Parts for Mercury Marine 500 Magneto Adaptor & Pilot Assembly
View diagram and parts list below.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
#1 | 394-2271A 2 | MAGNETO ASSEMBLY, COMPLETE (4D-4) (1,1 required per assembly) |
![]() |
394-2271A 2 - MAGNETO O NLA [ More info ] Unavailable |
|
#2 | 45-27951 | SHAFT, MAGNETO DRIVE (1,1 required per assembly) |
![]() |
||
#- | 29321A 7 | MAGNETO ADAPTOR AND PILOT ASSEMBLY, COMPLETE (1,1 required per assembly) |
![]() |
29321A 7 - PILOT ASSY O NLA [ More info ] Unavailable |
|
#3 | 29321A 1 | MAGNETO ADAPTOR AND PILOT ASSEMBLY, COMPLETE (1,1 required per assembly) |
![]() |
29321A 1 - 29321A 1 - PILOT ASSY O [ More info ] Unavailable Replaced by -39560A 1 |
|
![]() |
||
#4 | 30-20066 | BEARING, BALL - MAGNETO PILOT (1,1 required per assembly) |
![]() ![]() |
||
![]() ![]() |
18-1151 - Bearing, 30-20066 - Special Order - No Returns [ More info ] |
|
#5 | 24-27944 | SPRING, HORSESHOE - MAGNETO PILOT (1,1 required per assembly) |
![]() |
||
#6 | 17-27962 | PIN, ANCHOR - HORSESHOE SPRING TO PILOT (1,1 required per assembly) |
![]() |
||
#7 | 12-29245 | WASHER, HORSESHOE SPRING TO ANCHOR PIN (1,1 required per assembly) |
![]() ![]() |
||
![]() ![]() |
||
#8 | 27946A 1 | ECONOMISER COLLAR AND PIN ASSEMBLY (1,1 required per assembly) |
![]() |
||
#9 | 17-27961 | PIN, ECONOMISER COLLAR - SPRING RETAINER (1,1 required per assembly) |
![]() |
||
#10 | 22-25094 | FITTING, GREASE - MAGNETO ADAPTOR (1,1 required per assembly) |
![]() |
||
#11 | 29557A 1 | THROTTLE ACTUATOR ASSEMBLY (1,1 required per assembly) |
![]() |
29557A 1 - 29557A 1 - ACTUATOR ASSY O [ More info ] Unavailable Replaced by -38230A 1 |
|
![]() |
||
#12 | 23-26602 | BUSHING, NYLON-THROTTLE ACTUATOR (1,1 required per assembly) |
![]() |
||
#13 | 10-32078 | SCREW, THROTTLE ACTUATOR TO ECONOMISER COLLAR (2,2 required per assembly) |
![]() |
10-32078 - 10-32078 - SCREW O [ More info ] Unavailable Replaced by 10-31009 |
|
![]() |
10-31009 - SCREW O NLA [ More info ] Unavailable |
|
#14 | 27947 | SWIVEL, LINKAGE - ECONOMISER COLLAR (1,1 required per assembly) |
![]() |
||
#15 | 25996A 1 | SWIVEL AND LINK ROD ASSEMBLY (1,1 required per assembly) |
![]() |
||
#16 | 30043 | ADAPTOR, MAGNETO (1,1 required per assembly) |
![]() |
30043 - 30043 - ADAPTOR O [ More info ] Unavailable Replaced by -30043A 1 |
|
![]() |
||
![]() |
||
#18 | 12-27939 | WASHER, MAGNETO PILOT (1,1 required per assembly) |
![]() |
||
#19 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING (1,1 required per assembly) |
![]() |
||
#20 | 13-27959 | WASHER, WAVE - MAGNETO BALL BEARING TENSION (1,1 required per assembly) |
![]() |
||
#21 | 27955 | CAP, MAGNETO ADAPTOR AND PILOT FASTENING (1,1 required per assembly) |
![]() |
||
#22 | 10-30110 | SCREW, ADAPTOR AND PILOT TO MAGNETO (4,4 required per assembly) |
![]() |
||
#23 | 10-22040 | SCREW, ADAPTOR AND PILOT TO CRANKCASE (3,3 required per assembly) |
![]() |
||
![]() |
||
![]() |
||
#24 | 12-20084 | WASHER, ADAPTOR AND PILOT TO CRANKCASE SCREW (3,3 required per assembly) |
![]() ![]() |
||
#25 | 11-20083 | NUT, ADAPTOR AND PILOT TO CRANKCASE SCREW (3,3 required per assembly) |
![]() |
||
![]() ![]() |
||
#26 | 29277 | PLATE, THROTTLE STOP (1,1 required per assembly) |
![]() |
29277 - 29277 - PLATE O [ More info ] Unavailable Replaced by -53458 |
|
![]() |
||
#27 | 37-29315 | DECAL, THROTTLE STOP PLATE (STOP THROTTLE STOP PLATE (STOP A (1,1 required per assembly) |
![]() |
37-29315 - DECAL O NLA [ More info ] Unavailable |
|
#28 | 10-24933 | SCREW, THROTTLE STOP ADJUSTING (3,3 required per assembly) |
![]() |
||
#29 | 11-20088 | NUT, THROTTLE STOP ADJUSTING SCREW (3,3 required per assembly) |
![]() |
||
#30 | 26852 | CAP, NYLON - ADJUSTING SCREW (3,3 required per assembly) |
![]() ![]() |
||
#31 | 10-29197 | SCREW, THROTTLE STOP PLATE TO ADAPTOR (2,2 required per assembly) |
![]() |
10-29197 - 10-29197 - SCREW @10 O [ More info ] Unavailable Replaced by 10-69035 |
|
![]() ![]() |
||
#32 | 28-28657 | KEY, MAGNETO DRIVING (1,1 required per assembly) |
![]() |
||
#33 | 29784 | HUB, DRIVEN PULLY (1,1 required per assembly) |
![]() |
||
#34 | 29783A 1 | DRIVEN PULLEY ASSEMBLY (1,1 required per assembly) |
![]() |
||
#35 | 17-24873 | ROLL PIN, FLANGE LOCATING (1,1 required per assembly) |
![]() |
||
#36 | 29785 | FLANGE, DRIVEN PULLEY (1,1 required per assembly) |
![]() |
||
#37 | 12-20138 | WASHER, PULLEY CLAMPING SCREW (1,1 required per assembly) |
![]() |
||
#38 | 10-29240 | SCREW, PULLEY CLAMPING (1,1 required per assembly) |
![]() |
10-29240 - 10-29240 - SCREW O [ More info ] Unavailable Replaced by 10-32228 |
|
![]() ![]() |
||
#39 | 20140 | BELT, TIMING (1,1 required per assembly) |
![]() ![]() |
||
#40 | 27949 | RUD, LINK - UPPER (1,1 required per assembly) |
![]() |
||
#41 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING (1,1 required per assembly) |
![]() |
||
#42 | 27948 | SWIVEL, UPPER AND LOWER LINK RODS (3,3 required per assembly) |
![]() ![]() |
||
#43 | 28061 | LEVER, LINKAGE - UPPER (1,1 required per assembly) |
![]() |
||
#44 | 27941 | LEVER, LINKAGE - LOWER (1,1 required per assembly) |
![]() |
||
#45 | 27950 | ROD, LINK - LOWER (1,1 required per assembly) |
![]() |
||
#46 | 27940 | SHAFT, VERTICAL (1,1 required per assembly) |
![]() |
27940 - SHAFT O NLA [ More info ] Unavailable |
|
#47 | 32-35899 | TUBE, VERTICAL SHAFT (1,1 required per assembly) |
![]() |
32-35899 - TUBE O NLA [ More info ] Unavailable |
|
#48 | 23-22981 | BUSHING, NYLON - VERTICAL SHAFT (2,2 required per assembly) |
![]() |
||
#49 | 17-25870 | ROLL PIN, VERTICAL SHAFT AND LINKAGE LEVERS (3,3 required per assembly) |
![]() |
||
#51 | 11-20361 | NUT, UPPER AND LOWER SWIVEL TO LEVER AND BRACKET (3,3 required per assembly) |
![]() ![]() |
||
![]() ![]() |
||
![]() ![]() |
||
#52 | 10-25781 | SCREW, SET - LINKAGE LEVER (2,2 required per assembly) |
![]() |
10-25781 - SCREW @5 O NLA [ More info ] Unavailable |
|
#53 | 12-25866 | WASHER, VERTICAL SHAFT - CENTER (1,1 required per assembly) |
![]() |
12-25866 - WASHER @5 O NLA [ More info ] Unavailable |
|
#54 | 33-20127 | SPARK PLUG (4,4 required per assembly) |
![]() |
33-20127 - 33-20127 - SPARK PLUG @10 O [ More info ] Unavailable Replaced by 33-813469 |
|
![]() ![]() |
33-813469 - NGK B6S @10 O [ More info ] Unavailable |
|
![]() ![]() |
||
![]() ![]() |
||
#55 | 20119 | PROTECTOR, SPARK PLUG (4,4 required per assembly) |
![]() |
20119 - 20119 - PROTECTOR @10 O [ More info ] Unavailable Replaced by -20119A 1 |
|
![]() |
20119A 1 - 20119A 1 - PROTECT [email protected] O [ More info ] Unavailable Replaced by -47604A 1 |
|
![]() |
47604A 1 - 47604A 1 - [email protected] O [ More info ] Unavailable Replaced by 85-71006A 1 |
|
![]() |
||
![]() ![]() |
85-63709A 1 - Boot Kit - Black - Priced Individually [ More info ] |
|
#56 | 23564 | CABLE, HIGH TENSION LEAD - SPARK PLUG (4,4 required per assembly) |
![]() |
23564 - 23564 - CABLE O [ More info ] Unavailable Replaced by -23564A10 |
|
![]() |
23564A10 - 23564A10 - LEAD ASSY O [ More info ] Unavailable Replaced by -52615A 1 |
|
![]() |
||
![]() |
84-813706A46 - 84-813706A46 - CABLE ASSEMBLY O [ More info ] Unavailable Replaced by 84-821945A46 |
|
![]() ![]() |
||
#57 | 25-25429 | "O" RING, HIGH TENSION HEAD CABLE TO END CAP COVER (4,4 required per assembly) |
![]() |
||
#58 | 54-29425 | CLIP, HIGH TENSION LEAD CABLE FASTENING (2,2 required per assembly) |
![]() |
||
#59 | 54-25231 | CLIP, MERCURY SWITCH AND HARNESS LEADS TO MAGNETO (2,2 required per assembly) |
![]() |
||
#60 | 10-20401 | SCREW, LEAD CLIP TO MAGNETO (2,2 required per assembly) |
![]() ![]() |
||
#61 | 22789 | "D" WASHER, CLIP FASTENING SCREW (2,2 required per assembly) |
![]() |
||
![]() ![]() |
||
![]() |
8M0084613 - C-WASHER O [ More info ] Unavailable |
|
#62 | 394-1134A 1 | GROUND STRAP ASSEMBLY, MAGNETO TO CRANKCASE (1,1 required per assembly) |
![]() |