Parts for Mercury Marine 450 (4 Cylinder) Magneto Adaptor & Pilot Assembly
Tap to zoom. Scroll down to order.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
# | 29321A 7 | MAGNETO ADAPTOR AND PILOT ASSEMBLY, COMPLETE (1,1,1,1,1, required per assembly) |
29321A 7 - PILOT ASSY,NLA [ More info ] Unavailable |
||
#1 | 394-1652A 1 | MAGNETO ASSEMBLY, COMPLETE (4D-3) (1,1,1,1,1, required per assembly) |
394-1652A 1 - MAGNETO [ More info ] Unavailable |
||
394-2271A 2 - MAGNETO,NLA [ More info ] Unavailable |
||
#2 | 45-27951 | SHAFT, MAGNETO DRIVE (1,1,1,1,1, required per assembly) |
#3 | 29321A 1 | MAGNETO PILOT ASSEMBLY (1,1,1,1,1, required per assembly) |
#4 | 30-20066 | BEARING, BALL-MAGNETO PILOT (1,1,1,1,1, required per assembly) |
#5 | 24-27944 | SPRING, HORSESHOE-MAGNETO PILOT (1,1,1,1,1, required per assembly) |
24-27944 - Spring, Horseshoe - Disributor Housing,NLA [ More info ] |
||
#6 | 17-27962 | PIN, ANCHOR- HORSESHOE SPRING TO PILOT (1,1,1,1,1, required per assembly) |
#7 | 12-29245 | WASHER, HORSESHOE SPRING TO ANCHOR PIN (1,1,1,1,1, required per assembly) |
12-8M0204649 - WASHER Note: Priced Individually [ More info ] |
||
#8 | 27946A 1 | ECONOMISER COLLAR AND PIN ASSEMBLY (1,1,1,1,1, required per assembly) |
#9 | 17-27961 | PIN, ECONOMISER COLLAR-SPRING RETAINER (1,1,1,1,1, required per assembly) |
#10 | 22-25094 | FITTING, GREASE-ECONOMISER COLLAR (1,1,1,1,1, required per assembly) |
#11 | 29557A 1 | THROTTLE ACTUATOR ASSEMBLY (1,1,1,1,1, required per assembly) |
29557A 1 - ACTUATOR ASSY [ More info ] Unavailable |
||
#12 | 23-26602 | BUSHING, NYLON-THROTTLE ACTUATOR (1,1,1,1,1, required per assembly) |
#13 | 10-20665 | SCREW, THROTTLE ACTUATOR TO ECONOMISER COLLAR (,2,2,,, required per assembly) |
#14 | 12-20128 | WASHER, THROTTLE ACTUATOR SCREW (,2,2,,, required per assembly) |
#13 | 10-32078 | SCREW, THROTTLE ACTUATOR TO ECONOMISER COLLAR (2,,,2,2,2 required per assembly) |
10-32078 - SCREW [ More info ] Unavailable |
||
10-31009 - SCREW,NLA [ More info ] Unavailable |
||
#15 | 27947 | SWIVEL, LINKAGE-ECONMISER COLLAR (1,1,1,1,1, required per assembly) |
#16 | 25996A 1 | SWIVEL AND LINK ROD ASSEMBLY (1,1,1,1,1, required per assembly) |
#17 | 30043 | ADAPTOR, MAGNETO (1,1,1,1,1, required per assembly) |
30043 - Adaptor [ More info ] Unavailable |
||
#19 | 12-27939 | WASHER, MAGNETO PILOT (1,1,1,1,1, required per assembly) |
#20 | 14-27960 | TAB WASHER, ADAPTOR CAP FASTENING (1,1,1,1,1, required per assembly) |
#21 | 13-27959 | WASHER, WAVE-MAGNETO BALL BEARING TENSION (1,1,1,1,1, required per assembly) |
#22 | 27955 | CAP, MAGNETO ADAPTOR AND PILOT FASTENING (1,1,1,1,1, required per assembly) |
#23 | 10-30110 | SCREW, ADAPTOR AND PILOT TO MAGNETO (4,4,4,4,4, required per assembly) |
#24 | 10-22040 | SCREW, ADAPTOR AND PILOT TO CRANKCASE (3,3,3,3,3, required per assembly) |
#25 | 12-20084 | WASHER, ADAPTOR AND PILOT TO CRANKCASE SCREW (3,3,3,3,3, required per assembly) |
#26 | 11-20083 | NUT, ADAPTOR AND PILOT TO CRANKCASE SCREW (3,3,3,3,3, required per assembly) |
11-20083 - Nut, Starter Solenoid Terminal (5/16X24) [ More info ] |
||
#27 | 29277 | PLATE, THROTTLE STOP (1,1,1,1,1, required per assembly) |
29277 - PLATE [ More info ] Unavailable |
||
#28 | 37-29315 | DECAL, THROTTLE STOP PLATE (STOP ADJUSTMENTS) (1,1,1,1,1, required per assembly) |
37-29315 - DECAL,NLA [ More info ] Unavailable |
||
#29 | 10-24933 | SCREW, THROTTLE STOP ADJUSTING (3,3,3,3,3, required per assembly) |
10-24933 - Screw, NLA [ More info ] Unavailable |
||
#30 | 11-20088 | NUT, THROTTLE STOP ADJUSTING SCREW (3,3,3,3,3, required per assembly) |
#31 | 26852 | CAP, NYLON-ADJUSTING SCREW (3,3,3,3,3, required per assembly) |
#32 | 10-29197 | SCREW, THROTTLE STOP PLATE TO ADAPTOR (2,2,2,2,2, required per assembly) |
10-29197 - Screw/LockWasher [ More info ] Unavailable |
||
#33 | 28-28657 | KEY, MAGNETO DRIVING (1,1,1,1,1, required per assembly) |
#34 | 29784 | HUB, DRIVEN PULLEY (1,1,1,1,1, required per assembly) |
#35 | 29783A 1 | DRIVEN PULLEY ASSEMBLY (1,1,1,1,1, required per assembly) |
#36 | 17-24873 | ROLL PIN. FLANGE LOCATING (2,2,2,2,2, required per assembly) |
#37 | 29785 | FLANGE, DRIVEN PULLEY (1,1,1,1,1, required per assembly) |
#38 | 12-20138 | WASHER, PULLEY CLAMPING SCREW (1,1,1,1,1, required per assembly) |
#39 | 10-29240 | SCREW, PULLEY CLAMPING (1,1,1,1,1, required per assembly) |
10-29240 - Screw - Priced Individually [ More info ] Unavailable |
||
#40 | 20140 | BELT, TIMING (1,1,1,1,1, required per assembly) |
#41 | 27949 | ROD, LINK-UPPER (1,1,1,1,1, required per assembly) |
#42 | 11-25168 | NUT, UPPER LINK ROD ADJUSTING (1,1,1,1,1, required per assembly) |
#43 | 27948 | SWIVEL, UPPER AND LOWER LINKS RODS (3,3,3,3,3, required per assembly) |
#44 | 28061 | LEVER, LINKAGE-UPPER (1,1,1,1,1, required per assembly) |
#45 | 27941 | LEVER, LINKAGE-LOWER (1,1,1,1,1, required per assembly) |
#46 | 27950 | ROD, LINK-LOWER (1,1,1,1,1, required per assembly) |
27950 - Link Rod, NLA [ More info ] Unavailable |
||
#47 | 27940 | SHAFT, VERTICAL (1,1,1,1,1, required per assembly) |
27940 - SHAFT,NLA [ More info ] Unavailable |
||
#48 | 23-22981 | BUSHING, NYLON-VERTICAL SHAFT (2,2,2,2,2, required per assembly) |
#49 | 17-25870 | ROLL PIN, VERTICAL SHAFT AND LINKAGE LEVERS (3,3,3,3,3, required per assembly) |
#51 | 11-20361 | NUT, UPPER AND LOWER SWIVEL TO LEVER AND BRACKET (3,3,3,3,3, required per assembly) |
18-3722-9 - Lock Nut, 121731, 11-35888, Pack of 5 [ More info ]
$11.99 $6.88 |
||
#52 | 10-25781 | SCREW, SET-LINKAGE LEVER (2,2,2,2,2, required per assembly) |
10-25781 - SCREW,NLA [ More info ] Unavailable |
||
#53 | 12-25866 | WASHER, VERTICAL SHAFT-CENTER (1,1,1,1,1, required per assembly) |
#54 | 33-20127 | SPARK PLUG (4,4,4,4,4, required per assembly) |
33-20127 - SPARK PLUG Note: Priced Individually [ More info ] Unavailable |
||
33-813469 - NGK B6S - Priced Individually [ More info ] Unavailable |
||
33-813416 - PLUG BR6S @10 [ More info ] Unavailable |
||
#55 | 20119 | PROTECTOR, SPARK PLUG (4,4,4,4,4, required per assembly) |
20119 - Protector , Priced Individually [ More info ] Unavailable |
||
20119A 1 - Protect Assembly - Priced Individually [ More info ] Unavailable |
||
47604A 1 - Protector Assembly , Priced Individually [ More info ] Unavailable |
||
85-71006A 1 - Protector - Priced Individually [ More info ] Unavailable |
||
85-63709A 1 - Boot Kit - Black - Priced Individually [ More info ] |
||
#56 | 23564 | CABLE, HIGH TENSION LEAD-SPARK PLUG (4,4,4,4,4, required per assembly) |
23564 - 23564A10 [ More info ] Unavailable |
||
23564A10 - LEAD ASSY [ More info ] Unavailable |
||
52615A 1 - Lead Assembly [ More info ] Unavailable |
||
84-813706A46 - Cable Assembly [ More info ] Unavailable |
||
#57 | 25-25429 | "O" RING, HIGH TENSION HEAD CABLE TO END CAP COVER (4,4,4,4,4, required per assembly) |
25-25429 - O-Ring, High Tension Lead Cable,NLA [ More info ] |
||
#58 | 54-29425 | CLIP, HIGH TENSION LEAD CABLE FASTENING (2,2,2,2,2, required per assembly) |
#59 | 54-25231 | CLIP, MERCURY SWITCH AND HARNESS LEADS TO MAGNETO (2,2,2,2,2, required per assembly) |
54-25231 - Clip, NLA [ More info ] Unavailable |
||
#60 | 10-20401 | SCREW, LEAD CLIP TO MAGNETO (2,2,2,2,2, required per assembly) |
#61 | 22789 | "D" WASHER, CLIP FASTENING SCREW (2,2,2,2,2, required per assembly) |
22789 - C Washer - Priced Individually [ More info ] Unavailable |
||
69205 - C Washer [ More info ] Unavailable |
||
#62 | 394-1134A 1 | GROUND STRAP ASSEMBLY, MAGNETO TO CRANKCASE (1,1,1,1,1, required per assembly) |