Parts for Mercury Marine Trim / Tilt / Lift Systems & Components Full Power Tilt (Hydraulic Pump & Tilt Cylinders) D
View diagram and parts list below.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
#- | 36065A 6 | FULL POWER TILT (USE WITH MERCRUISER L - SERIAL #1684188 AND UP) SEE NOTE (,1, required per assembly) |
![]() |
36065A 6 - 36065A 6 - POWER TILT ASSY O [ More info ] Unavailable Replaced by -46174A 1 |
|
![]() |
46174A 1 - POWER TILT ASSY O NLA [ More info ] Unavailable |
|
#- | 36065A 8 | FULL POWER TILT(USE WITH MERCRUISER L - SERIAL #1684187 AND BELOW) SEE NOTE (L,, required per assembly) |
![]() |
36065A 8 - 36065A 8 - POWER TILT ASSY O [ More info ] Unavailable Replaced by -46174A 3 |
|
![]() |
46174A 3 - POWER TILT ASSY O NLA [ More info ] Unavailable |
|
#- | 36065A 7 | FULL POWER TILT (USE WITH MERCRUISER LL - SERIAL #1602186 AND UP) SEE NOTE (,,1 required per assembly) |
![]() |
36065A 7 - 36065A 7 - POWER TILT ASSY O [ More info ] Unavailable Replaced by -46174A 2 |
|
![]() |
46174A 2 - POWER TILT ASSY O NLA [ More info ] Unavailable |
|
#-- | 35978A 4 | CONTROL PANEL ASSEMBLY (1,1,1 required per assembly) |
![]() |
35978A 4 - PANEL/HARNESS O NLA [ More info ] Unavailable |
|
#36 | 35978 | PANEL, CONTROL (1,1,1 required per assembly) |
![]() |
||
#37 | 10-32866 | SCREW, CONTROL PANEL TO DASHBOARD (2") (2,2,2 required per assembly) |
![]() ![]() |
||
#38 | 12-33110 | WASHER, FIBER - CONTROL PANEL SCREW (2,2,2 required per assembly) |
![]() |
||
#39 | 11-20190 | NUT, CONTROL PANEL SCREW (2,2,2 required per assembly) |
![]() |
||
![]() |
||
#40 | 23-36273 | SPACER, IGNITION SWITCH (1,1,1 required per assembly) |
![]() |
23-36273 - 23-36273 - SPACER O [ More info ] Unavailable Replaced by 23-45773 |
|
![]() |
||
#41 | 30162 | SWITCH, IGNITION - CONTROL PANEL (WITH KEY #30431) (1,1,1 required per assembly) |
![]() |
30162 - 30162 - SWITCH O [ More info ] Unavailable Replaced by -52336 |
|
![]() |
52336 - 52336 - SWITCH O [ More info ] Unavailable Replaced by -54211 |
|
![]() |
||
![]() ![]() |
||
#42 | 35019 | JUMPER WIRE, IGNITION SWITCH TO ROCKER SWITCH (RED - 2 1/2") (1,1,1 required per assembly) |
![]() |
||
#43 | 34959 | SWITCH, ROCKER - CONTROL PANEL (1,1,1 required per assembly) |
![]() ![]() |
||
#44 | 10-32989 | SCREW, ROCKER SWITCH TO CONTROL PANEL (2,2,2 required per assembly) |
![]() |
10-32989 - SCREW O NLA [ More info ] Unavailable |
|
#45 | 37275 | BEZEL, IGNITION SWITCH TO CONTROL PANEL (1,1,1 required per assembly) |
![]() |
||
#46 | 37-35408 | DECAL, CONTROL PANEL - INSTRUCTION (1,1,1 required per assembly) |
![]() |
37-35408 - DECAL O NLA [ More info ] Unavailable |
|
#47 | 37-36035 | DECAL, CONTROL PANEL - "FULL POWER TILT" (1,1,1 required per assembly) |
![]() |
37-36035 - 37-36035 - DECAL O [ More info ] Unavailable Replaced by 37-45889 |
|
![]() |
37-45889 - DECAL O NLA [ More info ] Unavailable |
|
#48 | 37251 | HARNESS, CONTROL (1,1,1 required per assembly) |
![]() |
37251 - HARNESS O NLA [ More info ] Unavailable |
|
#49 | 54-22875 | CLAMP, CONTROL HARNESS (3,3,3 required per assembly) |
![]() |
||
#50 | 22789 | "D" WASHER, CONTROL HARNESS CLAMP SCREW (3,3,3 required per assembly) |
![]() |
||
![]() ![]() |
||
![]() |
8M0084613 - C-WASHER O [ More info ] Unavailable |
|
#51 | 12-20878 | WASHER, CONTROL HARNESS CLAMP SCREW (3,3,3 required per assembly) |
![]() |
||
#52 | 10-33615 | SCREW, WOOD - CONTROL HARNESS CLAMP TO BOAT (3,3,3 required per assembly) |
![]() |
10-33615 - 10-33615 - SCREW @5 O [ More info ] Unavailable Replaced by 10-35401 |
|
![]() ![]() |
||
#53 | 10-20644 | SCREW, CONTROL HARNESS CLAMP TO BOAT (3,3,3 required per assembly) |
![]() |
10-20644 - SCREW @5 O NLA [ More info ] Unavailable |
|
#54 | 11-20645 | NUT, CONTROL HARNESS CLAMP SCREW (3,3,3 required per assembly) |
![]() |
||
![]() ![]() |
||
#55 | 32-36169 | HOSE, CONNECTING - HYDRAULIC PUMP TO TEE (12") (1,1, required per assembly) |
![]() |
||
#56 | 22-37363 | TEE, CONNECTING HOSE TO LIFT HOSES (1,1, required per assembly) |
![]() |
||
![]() |
||
#57 | 32-36167 | HOSE, LIFT - TEE TO TILT CYLINDER (72") (2,2, required per assembly) |
![]() |
||
#58 | 54-23567 | CLIP, CONNECTING HOSES TO TRANSOM (9/16") (,,3 required per assembly) |
![]() |
||
#59 | 10-35401 | SCREW, LIFT AND CONNECTING HOSE CLIPS TO TRANSOM (5,5, required per assembly) |
#62 | 32-36168 | HOSE, LIFT - HOSE BLOCK TO TILT CYLINDER(96") (,,2 required per assembly) |
![]() |
||
#63 | 23-35977 | GROMMET, LIFT HOSE (2,2, required per assembly) |
![]() ![]() |
||
#63 | 23-36175 | GROMMET, CONNECTING HOSE (,,1 required per assembly) |
![]() |
23-36175 - 23-36175 - BUSHING O [ More info ] Unavailable Replaced by 23-35977 |
|
#64 | 36142 | BLOCK, HOSE - GIMBAL HOUSING (,,1 required per assembly) |
![]() |
||
#65 | 22-35268 | PLUG, PIPE - HOSE BLOCK (,,1 required per assembly) |
![]() |
||
![]() ![]() |
||
![]() ![]() |
||
#66 | 10-36137 | SCREW, HOSE BLOCK TO GIMBAL HOUSING (1") (,,2 required per assembly) |
![]() ![]() |
||
#67 | 11-35888 | NUT, HOSE BLOCK SCREW (,,2 required per assembly) |
![]() ![]() |
||
![]() ![]() |
||
#68 | 36081 | COVER, INLET- TRANSOM (2,2, required per assembly) |
![]() ![]() |
||
#68 | 36135 | COVER, INLET- TRANSOM (,,1 required per assembly) |
![]() |
||
#69 | 27-36079 | GASKET, INLET COVER (2,2, required per assembly) |
![]() ![]() |
||
#70 | 10-33684 | SCREW, INLET COVER TO TRANSOM (3") (4,4, required per assembly) |
![]() ![]() |
||
#71 | 12-30971 | WASHER, INLET COVER SCREW (4,4, required per assembly) |
![]() |
||
#72 | 11-33825 | NUT, INLET COVER SCREW (4,4, required per assembly) |
![]() |
||
![]() ![]() |
||
#73 | 54-22740 | CLIP, LIFT HOSE TO TRANSOM (2,2, required per assembly) |
![]() |
||
#73 | 54-32874 | CLIP, LIFT HOSE TO TRANSOM (,,1 required per assembly) |
![]() |
54-32874 - 54-32874 - CLAMP O [ More info ] Unavailable Replaced by 54-35260 |
|
![]() |
54-35260 - CLAMP O NLA [ More info ] Unavailable |
|
#75 | 12-29245 | WASHER, LIFT HOSE CLIP SCREW (2,2, required per assembly) |
![]() ![]() |
||
![]() ![]() |
||
#76 | 91-37681A 1 | WRENCH ASSEMBLY, SHOCK ABSORBER CAP (,1, required per assembly) |
![]() |
91-37681A 1 - WRENCH ASSY O NLA [ More info ] Unavailable |
|
#77 | 32979 | BATTERY LEAD, POSITIVE (1,1,1 required per assembly) |
![]() |
32979 - LEAD Battery O NLA [ More info ] Unavailable |
|
#77 | 32988 | BATTERY LEAD, NEGATIVE (1,1,1 required per assembly) |
![]() |
32988 - LEAD Battery O NLA [ More info ] Unavailable |
|
#78 | 18-35017 | COTTER PIN, HINGE PIN RETAINING - GIMBAL RING (2 1/2") (,2, required per assembly) |
![]() |
||
#79 | 18-32521 | COTTER PIN, SHOCK ABSORBER PIN RETAINING - GIMBAL RING (2 1/4") (,2, required per assembly) |
![]() |
18-32521 - 18-32521 - PIN-COTTER O [ More info ] Unavailable Replaced by 18-35017 |
|
#80 | 23-36220 | SPACER, SHOCK ABSORBER (,2, required per assembly) |
![]() |
||
#81 | 36222A 1 | BELLOWS ASSEMBLY, UNIVERSAL JOINT (,1, required per assembly) |
![]() |
||
![]() ![]() |
||
#82 | 92-36340 1 | ADHESIVE, UNIVERSAL JOINT BELLOWS (,1, required per assembly) |
![]() |
92-36340 1 - 92-36340 1 - [email protected] O [ More info ] Unavailable Replaced by 92-36340A 1 |
|
![]() |
92-36340A 1 - 92-36340A 1 - ADHESIVE @4 O [ More info ] Unavailable Replaced by 92-86166 |
|
![]() |
92-86166 - 92-86166 - BELLOW ADHESIVE O [ More info ] Unavailable Replaced by 92-25234 1 |
|
![]() |
92-25234 1 - 92-25234 1 - GLUE TUBE O [ More info ] Unavailable Replaced by 92-86166 1 |
|
![]() ![]() |
92-86166 1 - 92-86166 1 - ADHESIVE-BELLOWS O [ More info ] Unavailable Replaced by 92-86166Q 1 |
|
![]() ![]() |
||
#83 | 24-36271 | SPRING, UNIVERSAL JOINT BELLOWS (,1, required per assembly) |
![]() |
||
#84 | 32589A 1 | ARM ASSEMBLY, REVERSE HOOK - DRIVE SHAFT HOUSING (,1, required per assembly) |
![]() |
||
![]() |
||
![]() ![]() |
||
#85 | 32520 | HOOK, REVERSE (,2, required per assembly) |
![]() |
||
#86 | 24-33761 | SPRING, TENSION - REVERSE HOOK TO REVERSE HOOK ARM (,2, required per assembly) |
![]() |
||
#87 | 10-32527 | SCREW, REVERSE HOOKS TO REVERSE HOOK ARM (,1, required per assembly) |
![]() |
||
#90 | 32588A 1 | STOP ASSEMBLY, REVERSE HOOK (,1, required per assembly) |
![]() |