Parts for MerCruiser 80 Renault 80 I / L4 1966-1969 Gimbal / Bell Housing Assembly
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
#1 | -38160A 8 | GIMBAL HOUSING ASSEMBLY (1 required per assembly) (S/N-238045 & Below) |
38160A 8 - Housing [ More info ] Unavailable |
||
#1 | -49201A 4 | GIMBAL HOUSING ASSEMBLY (1 required per assembly) (S/N-238046 & Up) |
#2 | 22-31345 | GREASE FITTING (1 required per assembly) |
22-31345 - Fitting - Priced Individually [ More info ] Unavailable |
||
228M0169589 - FITTING Note: Priced Individually [ More info ] |
||
#3 | -29359 | LUBRICAP (1 required per assembly) |
#4 | 19-38860 | WELCH PLUG-Top (1 required per assembly) |
19-38860 - WELCH PLUG,NLA [ More info ] Unavailable |
||
#5 | 23-38634 | BUSHING-Upper (1 required per assembly) |
#6 | 26-32540 | OIL SEAL-Upper Gimbal Housing Bushing (1 required per assembly) |
#7 | 23-38196 | BUSHING-Lower (1 required per assembly) |
23-38196 - BUSHING,NLA [ More info ] Unavailable |
||
#8 | 26-32911 | OIL SEAL-Lower Gimbal Housing Bushing (2 required per assembly) |
#9 | 30-31561 | BALL BEARING (1 required per assembly) |
#10 | -38188 | MOUNT-Rubber-Gimbal Housing Ball Bearing (1 required per assembly) |
38188 - Gimbal Housing Ball Bearing Mount, Rubber, NLA [ More info ] Unavailable |
||
#12 | 27-38168 | GASKET-Gimbal Housing to Transom (1 required per assembly) |
27-38168 - Gimbal Housing To Transom Gasket [ More info ] Unavailable |
||
27-70975 - Gasket [ More info ] Unavailable |
||
#13 | -38413 | PILOT RING (1 required per assembly) |
#14 | 26-38294 | SEAL-Water (1 required per assembly) |
#15 | -34762A 1 | PLATE ASSEMBLY-Inhibitor (1 required per assembly) |
#16 | 10-34763 | SCREW-Inhibitor Plate to Gimbal Housing (3/4 IN.) (2 required per assembly) |
#17 | 12-38403 | WASHER-Rubber-Gimbal Housing Bolt (4 required per assembly) (S/N-238045 & Below) |
12-38403 - Washer-Rubber-Gimbal Housing Bolt, NLA [ More info ] |
||
#17 | 12-49199 | WASHER-Rubber-Gimbal Housing Bolt (2 required per assembly) (S/N-238046 & Up) |
#18 | 32-38841 | WATER TUBE (1 required per assembly) |
32-38841 - Tube, NLA [ More info ] Unavailable |
||
#19 | 54-38840 | CLAMP-Water Tube to Gimbal Housing (1 required per assembly) |
54-38840 - CLAMP,NLA [ More info ] Unavailable |
||
#20 | 10-38862 | SCREW-Water Tube Clamp to Gimbal Housing (5/8 IN.) (1 required per assembly) |
10-38862 - Screw - Priced Individually [ More info ] Unavailable |
||
#21 | 13-26992 | LOCKWASHER-Water Tube Clamp Screw (1 required per assembly) |
#22 | 23-38265 | BUSHING-Seal-Water Tube (1 required per assembly) |
#23 | -38209 | COVER-Water Tube (1 required per assembly) |
#24 | 10-34290 | SCREW-Water Tube Cover to Gimbal Housing (5/8 IN.) (2 required per assembly) |
#25 | 32-38303 | HOSE-Water-Gimbal Housing to Bell Housing (10-1/4 IN.) (1 required per assembly) |
32-38303 - Hose-Water-Gimbal Housing To Bell Housing - 10.25 Inch [ More info ] Unavailable |
||
#NS | -46443 | EMBLEM-Gimbal Housing (1 required per assembly) |
46443 - Emblem [ More info ] Unavailable |
||
56038 - Emblem [ More info ] Unavailable |
||
63720 - Emblem [ More info ] Unavailable |
||
37-13682 11 - Decal [ More info ] Unavailable |
||
#26 | 54-35830 | CLAMP-Water Tube to Gimbal Housing & Bell Housing (2 required per assembly) |
54-35830 - Hose Clamp [ More info ] Unavailable |
||
54-815504206 - Clamp [ More info ] Unavailable |
||
#27 | -38584 | PLATE-Supporting-Transom Screw (Top) (1 required per assembly) |
38584 - PLATE,NLA [ More info ] Unavailable |
||
#28 | 12-38585 | WASHER-Square-Transom Screw (2 required per assembly) |
#29 | 10-38197 | SCREW-Transom to Gimbal Housing (3-1/2 IN.) (4 required per assembly) |
10-38197 - BOLT,NLA [ More info ] Unavailable |
||
#30 | 13-30381 | LOCKWASHER-Transom Screw (4 required per assembly) |
#31 | 10-38233 | BOLT-Gimbal Housing to Transom Plate (4-1/4 IN.) (4 required per assembly) (S/N-2328045 & Below) |
10-38233 - BOLT [ More info ] Unavailable |
||
#31 | 10-48565 | BOLT-Gimbal Housing to Transom Plate (4-1/2 IN.) (4 required per assembly) (S/N-2328046 & Up) |
#32 | 12-36041 | WASHER-Gimbal Housing Bolt (4 required per assembly) (S/N-2328046 & Up) |
12-36041 - Washer-tilt Cylinder Anchor Pin (33/64 In. I.d.) NLA [ More info ] |
||
#32 | 12-21900 | WASHER-Gimbal Housing Bolt (4 required per assembly) |
#33 | 11-34087 | NUT-Gimbal Housing Bolt (4 required per assembly) |
#34 | -38176A 1 | BELLOWS ASSEMBLY-Universal Joint (1 required per assembly) |
#35 | 54-32739 | CLAMP-Universal Joint Bellows to Gimbal Housing (1 required per assembly) |
#36 | 54-38889 | CLAMP-Universal Joint Bellows to Bell Housing (1 required per assembly) |
54-38889 - CLAMP [ More info ] Unavailable |
||
#37 | -38177 | EXHAUST BELLOWS (1 required per assembly) |
38177 - Bellows, NLA [ More info ] Unavailable |
||
#38 | 54-38888 | CLAMP-Exhaust Bellows to Gimbal Housing (1 required per assembly) |
#40 | -38162A 3 | BELL HOUSING ASSEMBLY (1 required per assembly) |
38162A 3 - Bell Housing, NLA [ More info ] Unavailable |
||
#41 | 22-38939 | COUPLING-Water Hose to Bell Housing (1 required per assembly) |
22-38939 - COUPLING [ More info ] Unavailable |
||
22-30570 - Fitting, NLA [ More info ] Unavailable |
||
#42 | 10-35046 | DRIVE SCREW-Bell Housing Flange (8 required per assembly) |
10-35046 - SCREW,NLA [ More info ] Unavailable |
||
#43 | 23-35088 | BUSHING-Upper Shift Shaft-Bell Housing (5/8 IN.) (1 required per assembly) |
23-35088 - Bushing [ More info ] Unavailable |
||
#44 | 26-45587 | OIL SEAL (1 required per assembly) |
#45 | 23-45588 | BUSHING-Upper Shift Shaft-Bell Housing (5/16 IN.) (1 required per assembly) |
#46 | 25-31305 | O RING (LARGE) (1 required per assembly) |
#47 | 25-22762 | O RING (SMALL) (1 required per assembly) |
#48 | 16-35937 | STUD-Bell Housing to Drive Shaft Housing (2-7/8 IN.) (4 required per assembly) |
16-35937 - Stud [ More info ] Unavailable |
||
#49 | 12-35935 | WASHER-Bell Housing Stud (4 required per assembly) |
12-35935 - Washer, (.435 X .875 X .105) Stainless Steel [ More info ] Unavailable |
||
12-8M0204655 - WASHER Note: Priced Individually C/U W/BELHSG&T PINZZ [ More info ] |
||
#50 | 11-34933 | NUT-Bell Housing Stud (4 required per assembly) |
11-34933 - Nut (7/16-20) [ More info ] Unavailable |
||
11-8M0204653 - Prop Lock Nut 7/16-20 , Priced Individually [ More info ] |
||
18-3721-9 - Lock Nut, 11-34933, 5PK [ More info ]
$19.49 $13.18 |
||
#51 | 27-45749A 1 | GASKET-Bell Housing to Drive Shaft Housing (1 required per assembly) |
27-45749A 1 - Bell Housing To Drive Shaft Housing Gasket [ More info ] |
||
#52 | -45696A 1 | UPPER SHIFT SHAFT ASSEMBLY (1 required per assembly) |
#53 | 12-29330 | WASHER-Upper Shift Shaft (13/16 IN. O.D.) (1 required per assembly) |
#54 | -45697 | UPPER SHIFT SHAFT LEVER (1 required per assembly) |
45697 - Lever [ More info ] Unavailable |
||
#55 | 12-39116 | WASHER-Upper Shift Lever (1 IN. O.D.) (1 required per assembly) |
#56 | 10-45590 | SCREW-Shift Lever to Shift Shaft (1 required per assembly) |
10-45590 - Screw - Priced Individually [ More info ] Unavailable |
||
#57 | -38262A 1 | LINK ROD ASSEMBLY (1 required per assembly) |
38262A 1 - ROD ASSY,NLA [ More info ] Unavailable |
||
#58 | 12-30164 | WASHER-Link Rod (3/8 IN. O.D.) (1 required per assembly) |
#59 | 18-21071 | COTTER PIN- Link Rod to Upper Shift Shaft Lever (1 required per assembly) |
#NS | 37-39395 | DECAL-Serial Number (1 required per assembly) |
37-39395 - DECAL,NLA [ More info ] Unavailable |