Parts for Chrysler 15 HP (1976) Magneto (Manual Start Models)
Tap to zoom. Scroll down to order.
Reference numbers in this diagram can be found in a light blue row below — scroll down to order.
# | F12091 | LEAD WIRE MARKER TOP (NOT SHOWN) (1 required per assembly) |
F12091 - Stator PART,NLA [ More info ] Unavailable |
||
#1 | F1809 | HEX NUT, 1/2 - 20 (1 required per assembly) |
#2 | F901456-1 | EMERGENCY STARTER COLLAR (1 required per assembly) |
#3 | F302097 | FLYWHEEL (1 required per assembly) |
F302097 - FK302097, NLA [ More info ] Unavailable |
||
FK302097 - Flywheel Kit,NLA [ More info ] Unavailable |
||
#4 | F12170 | CONTACT SCREW W/LOCKWASHER (4 required per assembly) |
#5 | F12228 | CAM WIPER FELT (1 required per assembly) |
F12228 - F12228 - FELT [ More info ] Unavailable Replaced by -F12360 |
||
#6 | F12153 | BREAKER POINT SET (2 required per assembly) |
F12153 - F121531 POINT SET [ More info ] Unavailable |
||
F12153-1 - Contact Set [ More info ] Unavailable |
||
#7 | F12083 | CONDENSER SCREW W/LOCKWASHER (2 required per assembly) |
F12083 - 10F12170 [ More info ] Unavailable |
||
#8 | F12181-1 | CONDENSER (2 required per assembly) |
#9 | F12343 | STATOR PLATE W/LAMINATIONS (1 required per assembly) |
F12343 - Plate Assembly, NLA [ More info ] Unavailable |
||
#10 | F286192 | THROTTLE CAM PLATE (1 required per assembly) |
#11 | F289664 | WIRE, STATOR GROUND (1 required per assembly) |
#12 | F1075 | FILL HD SCREW, 10 - 24 X 1/2 (4 required per assembly) |
F1075 - 10F1090 [ More info ] Unavailable |
||
#13 | F217002 | MAGNETO BREAKER CAM (1 required per assembly) |
F217002 - Cam, NLA [ More info ] Unavailable |
||
#14 | F458498 | MAGNETO KEY (1 required per assembly) |
F458498 - 28F4584981 [ More info ] Unavailable |
||
#15 | F12146 | COIL WEDGE SPRING (2 required per assembly) |
#16 | F1090 | FILL HD SCREW W/LOCKWASHER, 10 - 24 X 9/16 (4 required per assembly) |
#17 | FA12345 | COIL W/LEAD WIRE (2 required per assembly) |
FA12345 - COIL KIT [ More info ] Unavailable |
||
FA12370 - Coil with Lead Wire and Wedge [ More info ] Unavailable |
||
#19 | F12088 | GROMMET (4 required per assembly) |
#20 | FK750-1 | SPARKLE W/SPRING (2 required per assembly) |
FK750-1 - FK7502, NLA [ More info ] Unavailable |
||
FK750-2 - FK1123, NLA [ More info ] Unavailable |
||
FK1123 - Boot Kit [ More info ] Unavailable |
||
85-63709A 1 - Boot Kit - Black - Priced Individually [ More info ] |
||
#21 | F12127 | STUD NUT (2 required per assembly) |
F12127 - F12127 - NUT [ More info ] Unavailable Replaced by 11-F1337 |
||
#22 | F8055 | LOCKWASHER (2 required per assembly) |
F8055 - LockWasher, NLA [ More info ] Unavailable |
||
#23 | F12128 | INSULATOR, OUTSIDE (2 required per assembly) |
F12128 - F12128 - CONNECTOR [ More info ] Unavailable Replaced by -F12133 |
||
#24 | F12142 | CONNECTION STUD (2 required per assembly) |
#25 | F12129 | INSULATOR, INSIDE (2 required per assembly) |
#26 | F12114 | COIL GROUND TERMINAL SCREW (2 required per assembly) |
F12114 - SCREW,NLA [ More info ] Unavailable |
||
#27 | F12141 | HIGH TENSION LEAD SLEEVE (1 required per assembly) |
F12141 - Stator Part, NLA [ More info ] Unavailable |
||
#28 | F12097 | BREAKER ARM PIVOT RETAINING RING (1 required per assembly) |
F12097 - Stator PART,NLA [ More info ] Unavailable |
||
#29 | F12186 | PRIMARY TERMINAL WIRE (1 required per assembly) |
F12186 - F121861 [ More info ] Unavailable |
||
F12186-1 - Wire Assembly, NLA [ More info ] Unavailable |
||
#30 | F436449 | SHORTING SWITCH (1 required per assembly) |
87-817952A 1 - Switch Kit [ More info ] Unavailable |
||
87-824440A18 - Switch KIT,NLA [ More info ] Unavailable |