Logo

Autopilot Pump

SEASTAR and BAYSTAR Hydraulic Steering Systems
9-9
The SeaStar Autopilot pump is a fixed flow, reversible type set that
uses an internal hydraulic gear pump, producing very little vibration or
noise. It is offered in 12 and 24 volt configurations, as well as two
different pump sizes (type 1 & type 2). It can be used as a stand alone
pilot pump or can be mounted to a previously installed SeaStar Power
Assist unit and can prevent the need to break into the hydraulic lines.
Long life DC Motor (i.e. long life brushes)
Compact design
Simplified installation
Low power consumption
ABYC, CE and J1171 compliant
Superior corrosion resistance
Quiet operation
Mounting bracket included
Stand alone or mounts to SeaStar Power Assist Unit with purchase
of retrofit kit HA1205.
AUTOPILOT PUMP
Features
Technical Specifications
4.78" (122mm)
3.15" (80mm)
4.61" (117mm)
6.63"
(168mm)
4.20" (106.7mm) 2.5" (63.5mm)
Voltage 12 Volt or 24 Volt
Fittings Compatible with Standard SeaStar Hoses (HO51xx etc)
Wire:
Length / Gauge / Connector
24” / 12 awg / None–Bare Leads
Oil Compatibility SeaStar Steering Fluid (MIL 5606)
Weight 4.9 lbs (2.2 kg)
Autopilot Pump Size Type 1: 60 in
3
/min (no-load)
Type 2: 100 in
3
/min (no-load)
Maximum Pressure 1000 psi
Typical Current Draw 12V Type 1: 4 – 8 amps
(Depending on Application) 12V Type 2: 5 11 amps
24V Type 1: 2 4 amps
24V Type 2: 3 6 amps
Autopilot Cylinder Capacity Type 1 4.9 in
3
- 12.5 in
3
Type 2 12.5 in
3
- 21 in
3
Ordering Information Part #
Type1 12v 60cu.in/min AP1219
Type2 12v 100cu.in/min AP1233
Type1 24v 60cu.in/min AP2419
Type2 24v 100cu.in/min AP2433