Logo

SeaStar Outboard Hose: Single Station

9-4
Selection Guide
OUTBOARD HOSE
Single Station
Figure D
Dual Front Mount Cylinders
Note: cylinder body moves
Figure E
Dual Side Mount Cylinders
Note: cylinder body stationary
Figure F
Single Front Mount Cylinder
Note: cylinder body moves
Figure G
Single Side Mount Cylinder
Note: cylinder body stationary
How to Measure Hoses:
Single Station, Single
Cylinder, WITH
Bulkhead
Helm to Steering Cylinder. Using the illustrations below:
1) Measure from center of steering wheel to the starboard side wall.
2) Measure the intended path of the hoses from the starboard side
wall to the center of the engine.
3) Round UP the measurement to the nearest 'even' number and add
2 feet (0.6m). This is the length of the bulkhead hose kit required.
4) Order hose kit part no. HO81xx (item 4). The last two digits
correspond to the length of hose.
How to Measure Hoses:
Single Station, Dual
Cylinders, NO
Bulkhead
Helm to hose tee fittings. Using the illustrations below:
1) Measure from center of steering wheel to the starboard side wall.
2) Measure from the starboard side wall to the transom.
3) Measure from the transom to your hose tee fittings (item 6).
4) Round UP the measurement to the nearest 'even' number. This is
the length of hose kit required.
5) Order hose kit part no. HO51xx (item 1). The last two digits
correspond to the length of hose.
Hose tee fittings to steering cylinders. Using the illustrations below:
1) Measure the intended path of the hoses from the tee fitting (item
6) to the center of the PORT side engine.
2) Round UP the measurement to the nearest 'even' number and add
2 feet (0.6m). This is the length of the hose kit required.
3) Order hose kits part no. HO51xx (items 2 & 3). The last two digits
correspond to the length of hose.
NOTICE
This configuration also requires
the purchase of Tee fitting kit #