Logo

Seastar Helms: SeaStar Pro Helm Order Guide

SEASTAR and BAYSTAR Hydraulic Steering Systems
6-5
HELMS
SeaStar PRO Helm–Order Guide
PART HELM DISPLACEMENT RELIEF VALVE NOTES
NUMBER DESCRIPTION CU. IN./REV (CC/REV) SETTING PSI (BAR)
HH5779-3 FRONT MOUNT 1.7 (27.8) 1500 (103) 1
HH5218-3 FRONT MOUNT, COMMERCIAL 1.7 (27.8) 1500 (103) 1, 2
HH5770-3 FRONT MOUNT 2.0 (33.0) 1500 (103) 1
HH5772-3 FRONT MOUNT 2.4 (39.3) 1500 (103) 1
HH5778-3 REAR MOUNT 1.7 (27.8) 1500 (103) 1
HH5771-3 REAR MOUNT 2.0 (33.0) 1500 (103) 1
HH6573-3 CLASSIC TILT 1.7 (27.8) 1500 (103) Replaces HH5773
HH6489-3 SPORT PLUS 1.7 (27.8) 1500 (103) New Product
HH6574-3 CLASSIC TILT 2.0 (33.0) 1500 (103) Replaces HH5774
HH6490-3 SPORT PLUS 2.0 (33.0) 1500 (103) New product
HH6189-3 SPORT TILT 1.7 (27.8) 1500 (103) 1
HH6190-3 SPORT TILT 2.0 (33.0) 1500 (103) 1
NOTES
1. SeaStar PRO helms cannot be used with an unbalanced cylinder.
SeaStar reinforced Kevlar Outboard style hoses should be used with
ALL SeaStar PRO helms.
2. Commercial helms use a stainless steel shaft and a better sealing top
plate for use in extreme conditions and or commercial type applications.
SeaStar PRO Front Mount
SeaStar PRO Rear Mount
DO NOT use with an unbalanced cylinder. Steering lock up WILL occur.
WARNING
-3 helm pumps are fitted with Positionable O-ring style hose fitting ports
(commonly referred to as ORB). Do NOT attempt to install an NPT pipe
fitting into a -3 helm hose fitting ports. Doing so will lead to irreparable
damage to the helm. ONLY use SeaStar Solutions O-ring style hose
fittings (ORB).
CAUTION
SeaStar PRO Classic and
Sport Tilt