Logo

Seastar Helms: SeaStar Helm Order Guide

6-4
Selection Guide
PART HELM DISPLACEMENT RELIEF VALVE NOTES
NUMBER DESCRIPTION CU. IN./REV (CC/REV) SETTING PSI (BAR)
HH5269-3 FRONT MOUNT 1.4 (23.0) 1000 (70)
HH5271-3 FRONT MOUNT 1.7 (27.8) 1000 (70)
HH5217-3 FRONT MOUNT (Commercial) 1.7 (27.8) 1000 (70) 2
HH5273-3 FRONT MOUNT 2.0 (33.0) 1000 (70)
HH5272-3 FRONT MOUNT 2.4 (39.3) 1000 (70)
HH5224-3 FRONT MOUNT (Commercial) 2.4 (39.3) 1000 (70) 2
HH5285-3 FRONT MOUNT 3.0 (49.1) 1000 (70) New product
HH6193-3 SPORT TILT 1.4 (23.0) 1000 (70) New Product
HH6544-3 CLASSIC TILT 1.4 (23.0) 1000 (70) Replaces HH5744
HH6541-3 CLASSIC TILT 1.7 (27.8) 1000 (70) Replaces HH5741
HH6191-3 SPORT TILT 1.7 (27.8) 1000 (70) Replaces HH5291
HH6491-3 SPORT PLUS 1.7 (27.8) 1000 (70) New product
HH6543-3 CLASSIC TILT 2.0 (33.0) 1000 (70) Replaces HH5743
HH6145-3 SPORT TILT 2.0 (33.0) 1000 (70) Replaces HH5745
HH6445-3 SPORT PLUS 2.0 (33.0) 1000 (70) New product
HH6345-3 SPORT PLUS (Spline Shaft) 2.0 (33.0) 1000 (70) New product
HH6542-3 CLASSIC TILT 2.4 (39.3) 1000 (70) Replaces HH5742
HH6192-3 SPORT TILT 2.4 (39.3) 1000 (70) Replaces HH5292
HH6492-3 SPORT PLUS 2.4 (39.3) 1000 (70) New product
HH5260-3 REAR MOUNT 1.4 (23.0) 1000 (70)
HH5279-3 REAR MOUNT (1" Straight Shaft) 1.4 (23.0) 1000 (70)
HH5261-3 REAR MOUNT 1.7 (27.8) 1000 (70)
HH5281-3 REAR MOUNT (1" Tapered Shaft) 1.7 (27.8) 1000 (70)
HH5263-3 REAR MOUNT 2.0 (33.0) 1000 (70)
HH5262-3 REAR MOUNT 2.4 (39.3) 1000 (70)
HH5265-3 REAR MOUNT 3.0 (49.1) 1000 (70) New product
SeaStar Helm–Order Guide
HELMS
NOTES
1. SeaStar PRO helms cannot be used with an unbalanced cylinder.
SeaStar reinforced Kevlar Outboard style hoses should be used with
ALL SeaStar PRO helms.
2. Commercial helms use a stainless steel shaft and a better sealing top
plate for use in extreme conditions and or commercial type applications.
SeaStar Front Mount
SeaStar Rear Mount
NOTE: All rear mount helms are shipped with the remote filler tube.
SeaStar Tilt
NOTE: All sport tilt helms are shipped with the remote filler tube.
-3 helm pumps are fitted with Positionable O-ring style hose fitting ports
(commonly referred to as ORB). Do NOT attempt to install an NPT pipe
fitting into a -3 helm hose fitting ports. Doing so will lead to irreparable
damage to the helm. ONLY use SeaStar Solutions O-ring style hose
fittings (ORB).
CAUTION